LTC3209EUF-1#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Display Drivers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3209 |
| Pin Count | 20 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Efficiency | 94 % |
| Operating Supply Voltage | 3.3V |
| Power Supplies | 3V |
| Max Supply Voltage | 4.5V |
| Min Supply Voltage | 2.9V |
| Output Current | 600mA |
| Max Output Voltage | 3.2V |
| Topology | Switched Capacitor (Charge Pump) |
| Min Input Voltage | 2.9V |
| Max Input Voltage | 4.5V |
| Current - Output / Channel | 600mA Total |
| Internal Switch(s) | Yes |
| Dimming | I2C |
| Switching Frequency | 850kHz |
| Multiplexed Display Capability | NO |
| Length | 4mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
LTC3209EUF-1#PBF Overview
Additionally, there is a 20-WFQFN Exposed Pad package for saving space.As part of the design of this LED driver, there are 8 outputs that have been used.We are using Surface Mount as the mounting method.Initially, it emerges as a DC DC Regulator with high efficiency and a high degree of reliability.It is able to work normally at the operating temperature of -40°C~85°C TA.It operates with terminations of 20.With 20 pins at the base, this LED driver has a base configuration.LTC3209 is the base part number for this LED driver.4.5V is an acceptable maximum value for the supply voltage.This device contains 20 pins.As a result, its characteristics can also be categorized as Display Drivers.This device operates with a minimum input voltage of 2.9V volts.The maximum efficiency can be achieved by operating it at a minimal voltage of 2.9V.Supply current is limited to 4.5V at its maximum value.There is no current available to supply to the load.Powering systems requires an internal voltage of 3.3V.The electronic component can function fully when the switching frequency is maintained at 850kHz.It is not recommended to exceed 3.2V in the output voltage.
LTC3209EUF-1#PBF Features
Available in the 20-WFQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Supply voltage of 3V
Operating with the supply voltage of 3.3V
Switching frequency of 850kHz
LTC3209EUF-1#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3209EUF-1#PBF LED Driver ICs applications.
- Medical surgery lighting
- Auxiliary lights for on-vehicle cameras
- Replacement lamps
- Flicker-free LED Lighting using R1580N
- High-end retail lighting
- Down lights
- LED headlights
- Linear fluorescent
- LED backlight driver for LCD displays for Tablets and Note PCs
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
