LTC3704IMS#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3704 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | -72V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Negative |
| Voltage - Supply (Vcc/Vdd) | 2.5V~36V |
| Control Features | Enable, Frequency Control |
| Input Voltage (Min) | 2.5V |
| Topology | Cuk |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.05A |
| Frequency - Switching | 50kHz~1MHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Max Frequency | 1MHz |
| Duty Cycle (Max) | 92% |
| Clock Sync | Yes |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
LTC3704IMS#TRPBF Overview
With its 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, the switching controller fits the needs of most applications. The dc motor controller is adquate to generate for 1 outputs. The pmic is packaged in Tape & Reel (TR) solid enclosure. Transistor Driver dc switching's outputs (s) are supported. DC control operates at 2.5V~36V volts and has 2.5V~36V supply voltage. A -40°C~125°C TJ dc switcher is not a problem. The switching controller is capable of switching at the 50kHz~1MHz position. dc dc regulator can be generalized using Surface Mount. Switching control is made easier with the dcdc regulator's Enable, Frequency Control. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. Switching converters are designed with the terminal (s) at position DUAL . A variety of dc switching's functions can be performed on 10 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 5V. In addition to "LTC3704", there are other relevant dc to dc converter ics you can find. 10 pins are on switching converter. Specially, switching converter corresponds to type Switching Regulator or Controllers. The minimum input voltage of the dc dc voltage regulator should be 2.5V. DC regulator outputs -72V voltage based on test statistics. It should be noted that the dc to dc regulator only accepts 36V voltage as input voltage. DC regulator1MHz has the maximum frequency. 0.05A is the largest value switching converter outputs.
LTC3704IMS#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 50kHz~1MHz
Enable, Frequency Control
PULSE WIDTH MODULATION
LTC3704IMS#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3704IMS#TRPBF DC to DC converter applications.
- Electric heating, lighting
- Computer rooms
- Experimental setup
- Electrical distribution systems
- Communication system
- Program control systems
- CNC system
- Pipe bending machines
- Sensitive electronic devices
- PSRR circuits
