LTC3839IUH#PBF
| Parameters | |
|---|---|
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Pitch | 0.5mm |
| Base Part Number | LTC3839 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Number of Channels | 1 |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4.5V~38V |
| Control Features | Enable, Frequency Control, Phase Control, Power Good, Soft Start, Tracking |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz~2MHz |
| Input Voltage (Max) | 38V |
| Synchronous Rectifier | Yes |
| Max Frequency | 2MHz |
| Clock Sync | No |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 32-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 32 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2006 |
| Series | PolyPhase® |
LTC3839IUH#PBF Overview
With its 32-WFQFN Exposed Pad package, the switching controller fits the needs of most applications. This dc motor controller can be used to generate outputs with 2 numbers. A solid enclosure of Tube surrounds pmic. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching's4.5V~38V is the operating voltage and supply voltage of the dc control. Worked in an dc switcher with a -40°C~125°C TJ rating. Using this switching controller, it is possible to switch at 200kHz~2MHz. The Surface Mount allows it to be used for dc dc regulator in general. Switching control is made easier with the dcdc regulator's Enable, Frequency Control, Phase Control, Power Good, Soft Start, Tracking. SWITCHING REGULATOR analog IC connects the switch converters. The switching converters's terminal (s) are designed at QUAD . A variety of dc switching's functions can be performed on 32 terminations. It is inputted with a DC switcher's voltage of 15V. You can find other relevant dc to dc converter ics by searching "LTC3839". There are only 32 pins on switching converter. Specially, switching converter corresponds to type Switching Regulator or Controllers. 4.5V should be the minimum input voltage for the dc dc voltage regulator. The test statistics indicate that DC regulator outputs a voltage of 5.5V. At most, the dc to dc regulator accepts 38V input voltage. The max frequency of the pmic can reach 2MHz. The dc to dc voltage regulator is from the PolyPhase? series. For high-quality communication, there are 1 channels.
LTC3839IUH#PBF Features
Transistor Driver Outputs
Switching Frequency: 200kHz~2MHz
Enable, Frequency Control, Phase Control, Power Good, Soft Start, Tracking
LTC3839IUH#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3839IUH#PBF DC to DC converter applications.
- Gear/thread machining machines
- Medical equipment
- Pipe bending machines
- Servo drive system
- Mobile phones
- Surface processing equipment
- Computed tomography (CT)
- Photovoltaic power
- Electrical distribution systems
- Injection molding machinery
