LTC3862EFE#PBF
| Parameters | |
|---|---|
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Frequency | 500kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3862 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 200V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Number of Channels | 1 |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 50mA |
| Voltage - Supply (Vcc/Vdd) | 4V~36V |
| Control Features | Enable, Frequency Control, Phase Control, Soft Start |
| Input Voltage (Min) | 4V |
| Topology | Boost, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 75kHz~500kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | PHASE-SHIFT |
| Duty Cycle (Max) | 96% |
| Clock Sync | Yes |
| Length | 7.8mm |
| Width | 4.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
LTC3862EFE#PBF Overview
Capsuled in the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package, the switching controller suits most application needs. It is sufficient to generate 2 outputs with this dc motor controller. Tube solid enclosure protects the pmic. The program can handle Transistor Driver dc switching's outputs (s). dc controls with 4V~36V voltage are supplied and operated. Suitable for working in an dc switcher that has a -40°C~85°C TA. With this switching controller, you can switch at 75kHz~500kHz. The Surface Mount makes it ideal for general dc dc regulator. Enable, Frequency Control, Phase Control, Soft Start is used for efficient switching control in the dcdc regulator. The switch converters are connected to an analog IC with a DUAL SWITCHING CONTROLLER output. There are a DUAL terminal on the switching converters. There are many different types of terminations for 24. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. The nominal DC switcher's voltage input is 12V. Search for "LTC3862" to find other relevant dc to dc converter ics. Pins number 24 of switching converter in total. There is a particular type of Switching Regulator or Controllers in switching converter. Input voltage of dc dc voltage regulator must be 4V. DC regulator outputs 200V voltage according to the test statistics. The dc to dc regulator is limited to 36V input voltage. In most cases, the output current of the dc dc regulator will be 50mA, so note that when you start the project. 500kHz is the frequency of the switching controller. It is recommended that there be 1 channels for high-quality communication.
LTC3862EFE#PBF Features
Transistor Driver Outputs
Switching Frequency: 75kHz~500kHz
Enable, Frequency Control, Phase Control, Soft Start
PULSE WIDTH MODULATION
Frequency: 500kHz
LTC3862EFE#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3862EFE#PBF DC to DC converter applications.
- Terrestrial set-top boxes
- Power supplies of electronic gadgets
- Shearing machines
- Emergency lighting monitoring equipment
- Linear guide
- Large fire protection systems
- Die casting equipment
- Telecommunications equipment
- Product burn-in
- Current source circuits
