LTC3868EGN-1#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3868 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 14V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Number of Channels | 1 |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4V~24V |
| Control Features | Enable, Frequency Control, Power Good, Soft Start |
| Input Voltage (Min) | 4V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 105kHz~835kHz 350kHz~535kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 850kHz |
| Duty Cycle (Max) | 99.4% |
| Clock Sync | No |
| Length | 9.893mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
LTC3868EGN-1#PBF Overview
With its 28-SSOP (0.154, 3.90mm Width) package, the switching controller fits the needs of most applications. For 2 outputs, the dc motor controller is appropriate. Tube is the solid enclosure in which PMIC is packaged. The program can handle Transistor Driver dc switching's outputs (s). 4V~24V is the operating voltage and supply voltage of the dc control. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. A switching controller such as this can switch at a value of 105kHz~835kHz 350kHz~535kHz . A generalization of dc dc regulator can be made using Surface Mount. Featured in the dcdc regulator is Enable, Frequency Control, Power Good, Soft Start which allows efficient switching control. A DUAL SWITCHING CONTROLLER analog IC is connected to the switch converters. The switching converters's terminals (s) are designed at DUAL. 28 terminations with a variety of function. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 12V is input. In addition to "LTC3868", there are other relevant dc to dc converter ics you can find. The switching converter has a total of 28 pins. Switching converter is a special type of Switching Regulator or Controllers. It is recommended that the input voltage of the dc dc voltage regulator be 4V. Statistically, the DC regulator outputs 14V voltage. DC regulator has a maximum frequency of 850kHz. A high-quality communication requires 1 channels.
LTC3868EGN-1#PBF Features
Transistor Driver Outputs
Switching Frequency: 105kHz~835kHz 350kHz~535kHz
Enable, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION
LTC3868EGN-1#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3868EGN-1#PBF DC to DC converter applications.
- Product testing
- SMT equipment
- Mobile phones
- Bending machines
- Driver circuits
- Overvoltage protection circuits in TV sets
- Terrestrial set-top boxes
- Smart grid
- Electric water heaters
- Surface processing equipment
