LTC4080EMSE#PBF
| Parameters | |
|---|---|
| Base Part Number | LTC4080 |
| Pin Count | 10 |
| Output Voltage | 4.2V |
| Operating Supply Voltage | 5V |
| Input Voltage-Nom | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3.75V |
| Analog IC - Other Type | BATTERY CHARGE CONTROLLER |
| Min Input Voltage | 3.75V |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.8A |
| Max Input Voltage | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | BUCK |
| Switching Frequency-Max | 2750kHz |
| Battery Chemistry | Lithium-Ion |
| Number of Cells | 1 |
| Current - Charging | Constant - Programmable |
| Charge Current - Max | 525mA |
| Height | 860μm |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
LTC4080EMSE#PBF Overview
It comes in the package?of a Tube. The package that is included with it comes in the shape of a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad.Amounting type Surface Mount is the one associated with the device.It is recommended that the temperature be set to -40°C~85°C TA in order to ensure reliable performance.Analog IC BATTERY CHARGE CONTROLLER is responsible for implementing the device.If the device needs to be charged, it must be supplied with Constant - Programmable current.The base part number LTC4080 represents its related parts.A total of 10 terminations can be found in it.The device is equipped with a total of 10 pins.A maximum charging current of 525mA is recommended.For the product to work correctly, 10 pins are required, and a connection to each pin is required.In order for the device to operate properly, the supply voltage should not exceed 5.5V.4.2V output voltages can result in high efficiency.It is capable of functioning at a voltage as low as possible, for example 3.75V voltage for this circuit is used.Input voltage is limited to 3.75V volts at the lowest.There is 5V voltage input on the device.The supply voltage should be set to 5V for best efficiency.A maximum input voltage of 5.5V volts can be applied to it.Parts with 2750kHz switching frequencies are at most available.
LTC4080EMSE#PBF Features
10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package
LTC4080EMSE#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC4080EMSE#PBF Battery Chargers ICs applications.
- Portable medical instruments
- Wireless headphones
- Drone
- Various chargers
- Remote control toys
- Ruggedized notebooks/tablet computers
- Embedded automotive applications
- Mobile lighting
- Industrial handhelds
- Emergency/Security
