LTC4352CDD#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 12-WFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 12 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | N+1 ORing Controller |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Redundant Power Supplies, Telecom Infrastructure |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Voltage - Supply | 2.9V~18V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.45mm |
| Base Part Number | LTC4352 |
| Pin Count | 12 |
| Output Voltage | 12V |
| Output Type | Voltage |
| Max Output Current | 200μA |
| Supply Voltage-Min (Vsup) | 2.9V |
| Number of Channels | 1 |
| Adjustable Threshold | NO |
| Turn On Delay Time | 250 ns |
| Current - Supply | 1.4mA |
| Max Output Voltage | 24V |
| FET Type | N-Channel |
| Max Input Voltage | 18V |
| Nominal Input Voltage | 18V |
| Turn-Off Delay Time | 500 ns |
| Ratio - Input:Output | N:1 |
| Internal Switch(s) | No |
| Number of Drivers | 1 |
| Delay Time - OFF | 200ns |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC4352CDD#PBF Overview
The case comes with it. As a result, it is suitable for packing the part in the Tube case. There are two ways in which this part is mounted. The voltage is set to 2.9V~18V. In order for this component to operate properly, its minimum operating temperature must not exceed 0°C~70°C. The component connected to Redundant Power Supplies, Telecom Infrastructure is a good match for this component. As far as the device classification is concerned, it falls under the N+1 ORing Controller category. A N-Channel-type FET can be identified. In the part there are 12 terminations that are available. There are 12 pins on it. A part based on LTC4352 is used in this part. It is powered by 12V to deliver its perfomance. For the purpose of running 250, this part's peak reflow temperature is utilized. It is necessary to run the supply current at 1.4mA for the part. There is a part of the Power Management Circuits family that is used in this part. In the part, you will find 12 pins. This part requires a voltage supply (Vsup) of 2.9V or greater. The chip can be used with an input voltage of more than 18V V. In terms of output current, the part can be delivered under 200μA output current. A maximum output voltage of 12V is achieved by it.
LTC4352CDD#PBF Features
in a 12-WFDFN Exposed Pad case
FET Type: N-Channel
12 terminations
Peak Reflow Temperature (Cel) : 250
LTC4352CDD#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC4352CDD#PBF Ideal Diode controller applications.
- Digital Radios
- Automotive battery protection
- Automotive USB hubs
- Alternator
- Industrial transport
- Active ORing for redundant power supplies
- Cell phones
- Active OR-ing of Redundant (N+1) Power Supplies
- Motor drives
- Industrial motor drives
