LTC4354CDDB#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Source Selector Switch |
| Terminal Finish | Matte Tin (Sn) |
| Applications | -48V Dist Power Systems, AdvancedTCA® Systems |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Voltage - Supply | -48V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC4354 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-N8 |
| Supply Voltage-Max (Vsup) | 11.75V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Channels | 1 |
| Adjustable Threshold | NO |
| Current - Supply | 1.2mA |
| FET Type | N-Channel |
| Supply Current-Max (Isup) | 2mA |
| Ratio - Input:Output | 2:1 |
| Internal Switch(s) | No |
| Delay Time - OFF | 700ns |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 2mm |
| RoHS Status | ROHS3 Compliant |
LTC4354CDDB#TRPBF Overview
The case comes in 8-WFDFN Exposed Pad shape. Parts should be packed in Tape & Reel (TR) cases. There are two ways in which this part is mounted. With -48V as its voltage, it is given a temperature of 0°C. A minimum operating temperature of 0°C~70°C must not be reached by this component. It is fitting for the component connected in -48V Dist Power Systems, AdvancedTCA? Systems. Source Selector Switch represents the device category. A type of FET known as N-Channel is a type of FET that can be recognized by its symbol, which can be found on the package. The part comes with 8 terminations. There are 8 pins on the board and it is designed with them. Using LTC4354 as a basis, the part is constructed. It is powered by 5V to deliver its perfomance. For the purpose of running 260, this part's peak reflow temperature is utilized. It is necessary to run the supply current at 1.2mA for the part. The part is from Power Management Circuits family. A voltage supply (Vsup) that is less than 4.5V should not be used for this part. In order to reach the maximum supply voltage, Vsup has to reach a value of 11.75V. It should be possible to conduct the supply current (Isup) under 2mA. The voltage at 5V can be delivered by it.
LTC4354CDDB#TRPBF Features
in a 8-WFDFN Exposed Pad case
FET Type: N-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
LTC4354CDDB#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC4354CDDB#TRPBF Ideal Diode controller applications.
- Asset tracker
- Digital Cameras
- Building automation
- Electricity meters
- Head Unit
- Reverse Polarity Protection
- Factory automation and control - PLC digital output modules
- Electronic point of sale
- AC Rectifier
- Power Tools
