LTC4354IS8#TRPBF
| Parameters | |
|---|---|
| Current - Supply | 1.2mA |
| FET Type | N-Channel |
| Supply Current-Max (Isup) | 2mA |
| Ratio - Input:Output | 2:1 |
| Internal Switch(s) | No |
| Delay Time - OFF | 700ns |
| Height Seated (Max) | 1.752mm |
| Length | 4.9025mm |
| Width | 3.899mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Source Selector Switch |
| Terminal Finish | Matte Tin (Sn) |
| Applications | -48V Dist Power Systems, AdvancedTCA® Systems |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Voltage - Supply | -48V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC4354 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Supply Voltage-Max (Vsup) | 11.75V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Channels | 1 |
| Adjustable Threshold | NO |
LTC4354IS8#TRPBF Overview
There is a 8-SOIC (0.154, 3.90mm Width) case that comes with it. Packing the part in Tape & Reel (TR) cases is ideal. Surface Mount is used to mount the part. We give it a voltage of -48V in order to test it. This component's minimum operating temperature must not be -40°C~85°C. The component connected in -48V Dist Power Systems, AdvancedTCA? Systems is suitable for this component. It is classified as a Source Selector Switch device by the manufacturer. The FET type can be recognized as N-Channel. A 8 termination is available on the part. There are 8 pins on the board and it is designed with them. LTC4354 is the base of this part. The performance of this device is powered by 5V. For 260, the peak reflow temperature of this part is used. In order to run the supply current for the part at 1.2mA. As far as I know, the part belongs to the Power Management Circuits family. There should be no less than 4.5V voltage supply for this part (Vsup). In order to reach the maximum supply voltage, Vsup has to reach a value of 11.75V. Under 2mA, the supply current (Isup) should flow. The voltage at 5V can be delivered by it.
LTC4354IS8#TRPBF Features
in a 8-SOIC (0.154, 3.90mm Width) case
FET Type: N-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
LTC4354IS8#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC4354IS8#TRPBF Ideal Diode controller applications.
- Automotive battery protection
- Motor drives
- ADAS domain controller
- PDAs
- PCs
- Active ORing for redundant power
- Power Tools
- Automotive USB hubs
- Power supply reverse polarity protection
- AC Rectifier
