LTC4355IMS#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-TFSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | N+1 ORing Controller |
| Terminal Finish | Matte Tin (Sn) |
| Applications | -48V Dist Power Systems, AdvancedTCA® Systems |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Voltage - Supply | 48V -48V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 20V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC4355 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Supply Voltage-Max (Vsup) | 80V |
| Power Supplies | 9/80V |
| Supply Voltage-Min (Vsup) | 9V |
| Number of Channels | 2 |
| Adjustable Threshold | NO |
| Current - Supply | 2mA |
| FET Type | N-Channel |
| Supply Current-Max (Isup) | 3mA |
| Ratio - Input:Output | 2:1 |
| Internal Switch(s) | No |
| Delay Time - OFF | 300ns |
| Height Seated (Max) | 1.1mm |
| Length | 4.039mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
LTC4355IMS#TRPBF Overview
This item comes in a 16-TFSOP (0.118, 3.00mm Width) case. In Tape & Reel (TR) cases, the part will be well protected. Surface Mount is used to mount the part. We give it a voltage of 48V -48V. In order for this component to operate properly, its minimum operating temperature must not exceed -40°C~85°C. A component connected in -48V Dist Power Systems, AdvancedTCA? Systems would be a good fit for it. A N+1 ORing Controller device is categorized as such. There is a N-Channel type of FET. Among the options available for the part are 16 terminations. Pins are positioned on 16 axes. LTC4355 underpins the part. 20V provides its performance. To run 260, we use the peak reflow temperature of this part. As the part at 2mA is running on a supply current, this is needed to ensure that the part can continue to run. A part from the Power Management Circuits family is what we are talking about. The minimum supply voltage (Vsup) for this part should not be less than 9V. It is at this point that Vsup reaches 80V, at which point the maximum supply voltage has been reached. In order to conduct under 3mA, the supply current (Isup) should be conducted. There is a capability for it to deliver voltage at 9/80V.
LTC4355IMS#TRPBF Features
in a 16-TFSOP (0.118, 3.00mm Width) case
FET Type: N-Channel
16 terminations
Peak Reflow Temperature (Cel) : 260
LTC4355IMS#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC4355IMS#TRPBF Ideal Diode controller applications.
- Automotive ADAS systems - camera
- Asset tracker
- Modems
- Building automation
- Automotive USB hubs
- PDAs
- Active OR-ing of Redundant (N+1) Power Supplies
- Active ORing for redundant power supplies
- Head Unit
- Active ORing for redundant power
