LTC4359IDCB#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 6-WFDFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | N+1 ORing Controller |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Automotive, Redundant Power Supplies, Telecom Infrastructure |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Voltage - Supply | 4V~80V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC4359 |
| Pin Count | 6 |
| JESD-30 Code | R-PDSO-N6 |
| Supply Voltage-Max (Vsup) | 80V |
| Power Supplies | 12V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Channels | 1 |
| Current - Output (Max) | 220μA |
| Adjustable Threshold | NO |
| Current - Supply | 150μA |
| FET Type | N-Channel |
| Supply Current-Max (Isup) | 0.2mA |
| Ratio - Input:Output | N:1 |
| Internal Switch(s) | No |
| Delay Time - OFF | 300ns |
| Delay Time - ON | 200μs |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 2mm |
| RoHS Status | ROHS3 Compliant |
LTC4359IDCB#TRPBF Overview
The case is 6-WFDFN Exposed Pad-shaped. As a result, it is suitable for packing the part in the Tape & Reel (TR) case. In this case, the part is mounted in the Surface Mount direction. There is a voltage of 4V~80V applied to it. In order for this component to operate correctly, its minimum operating temperature must not be -40°C~85°C TA. It is suitable for the component connected in Automotive, Redundant Power Supplies, Telecom Infrastructure. The device is categorized as N+1 ORing Controller. There is a N-Channel type of FET. In this part, there are 6 terminations. Pins are positioned on 6 axes. It is based on LTC4359. Performance is delivered through 12V. To run 260, we use the peak reflow temperature of this part. Run the supply current of the part at 150μA. It is part of the Power Management Circuits family. This part requires a voltage supply (Vsup) of 4V or greater. When Vsup reaches its maximum value, the maximum supply voltage is reached as soon as it reaches 80V. Current supply (Isup) must conduct under 0.2mA. 12V is the voltage it can deliver. A chip can work when its output current drops below 220μA.
LTC4359IDCB#TRPBF Features
in a 6-WFDFN Exposed Pad case
FET Type: N-Channel
6 terminations
Peak Reflow Temperature (Cel) : 260
LTC4359IDCB#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC4359IDCB#TRPBF Ideal Diode controller applications.
- Alternator
- PDAs
- Electronic point of sale
- Reverse Polarity Protection
- Digital Radios
- Automotive battery protection
- Automotive USB hubs
- Active ORing for redundant power supplies
- Industrial transport
- Motor drives
