LTC4416IMS-1#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2007 |
| Series | PowerPath™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | Source Selector Switch |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Battery Backup, Industrial/Automotive, High Current Switch |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Voltage - Supply | 3.6V~36V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC4416 |
| Pin Count | 10 |
| Supply Voltage-Max (Vsup) | 36V |
| Supply Voltage-Min (Vsup) | 3.6V |
| Number of Channels | 2 |
| Operating Supply Current | 130μA |
| Adjustable Threshold | NO |
| Turn On Delay Time | 60 μs |
| FET Type | P-Channel |
| Turn-Off Delay Time | 30 μs |
| Ratio - Input:Output | 2:2 |
| Internal Switch(s) | No |
| Delay Time - ON | 60μs |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
LTC4416IMS-1#PBF Overview
The case is made of 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) plastic. In this case, it is suitable to pack the part in a Tube case. In this case, the part is mounted in the Surface Mount direction. The voltage is set to 3.6V~36V. A minimum operating temperature of -40°C~125°C must not be reached by this component. Suitable for components connected in Battery Backup, Industrial/Automotive, High Current Switch. There is a Source Selector Switch category assigned to the device. There is a P-Channel type of FET. In the part there are 10 terminations that are available. Pins are positioned on 10 axes. Using LTC4416 as a basis, the part is constructed. 12V provides its performance. A maximum reflow temperature of this part is used if 260 is to be run. Part of the Power Management Circuits family. There are 10 pins in the part. It is important that Vsup for this part does not fall below 3.6V. 36V represents the maximum supply voltage (Vsup). In order to operate it, 130μA is used as the supply current. In the PowerPath? series, this device is one of the most popular devices.
LTC4416IMS-1#PBF Features
in a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) case
FET Type: P-Channel
10 terminations
Peak Reflow Temperature (Cel) : 260
LTC4416IMS-1#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC4416IMS-1#PBF Ideal Diode controller applications.
- Active OR-ing of Redundant (N+1) Power Supplies
- Alternator
- Automotive USB hubs
- Electricity meters
- Factory automation and control - PLC digital output modules
- Automotive ADAS systems - camera
- Digital Cameras
- Industrial transport
- Digital Radios
- Automotive battery protection
