LTC4440AMPMS8E-5#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| Published | 2013 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Voltage - Supply | 4V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 6V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LTC4440 |
| Pin Count | 8 |
| Max Output Current | 1.1A |
| Input Type | Non-Inverting |
| Rise / Fall Time (Typ) | 10ns 7ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Output Peak Current Limit-Nom | 1.1A |
| Driven Configuration | High-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 1.1A 1.1A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1.2V 1.6V |
| High Side Voltage - Max (Bootstrap) | 80V |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
LTC4440AMPMS8E-5#PBF Overview
The 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package provides greater flexibility.Tube represents the packaging method.There are 1 drivers installed for this device.There is a mounting bracket in the way of Surface Mount.When the supply voltage is set to 4V~15V, it can demonstrate its superiority.Gate type N-Channel MOSFET has been used in its design.In this device, temperatures must not exceed -55°C~150°C TJ.A type of Non-Inverting is used for input in this program.Mosfet driver consists of 8 terminations as Mosfet drivers foundation.Numerous related parts can be found under its base part number LTC4440.The device is mounted with Surface Mount.During design, it is configured with 8 pins.With a supply voltage of 6V, it is designed to operate.Mosfet driver is equipped wMosfet driverh an interface chip BUFFER OR INVERTER BASED MOSFET DRIVER.In the maximum case, the output current can be 1.1A volts.There are 8 component pins on the board.Maximum (Bootstrap) voltage is 80V.
LTC4440AMPMS8E-5#PBF Features
Embedded in the Tube package
1 drivers
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 80V
LTC4440AMPMS8E-5#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC4440AMPMS8E-5#PBF gate drivers applications.
- Isolated Supplies for Motor Control
- PCMCIA applications
- DC/DC converters
- serial peripheral interface (SPI), I2C
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Multicolor LED/laser displays
- Uninterruptible Power Supplies (UPS)
- Industrial Modules
- Broadcast equipment
- A/D drivers
