LTC490CS8#TRPBF
| Parameters | |
|---|---|
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC490 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Nominal Supply Current | 500μA |
| Data Rate | 2.5 Mbps |
| Output Characteristics | TOTEM-POLE |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 70mV |
| Transmit Delay-Max | 50 ns |
| Output Low Current-Max | 0.004A |
| Number of Transmitters | 1 |
| Length | 4.9mm |
LTC490CS8#TRPBF Overview
The enhanced 8-SOIC (0.154, 3.90mm Width) package makes it an excellent LED driver.Tape & Reel (TR) package is used to mount this receiver.Since this part is a Transceiver can transceiver, a number of solutions have been able to utiliTransceivere it for various purposes.This wide receiver can be placed on any Surface Mount-type PCB or development board.It takes 4.75V~5.25V from the power supply to run this differential driver.This electronic part can have?up to 1/1 eligible receivers/drivers on the field at once.?IC receiver's like this are designed for applications requiring a 0°C~70°C operating temperature.5V is the supply voltage range that this line driver ic can efficiently operate with.This transceiver is packaged with 8 market standard pinoutsSince the base part number LTC490 uniquely identifies the product type, temperature, package, etc., you can use it to find more variations.This is a 8-pin driver IC with enhanced power dissipation control.The package size of this optical transceiver has been dramatically reduced by downsizing ICs and using high-density Surface Mount mounting techniques.It was possible to achieve a 1-bit resolution through this ic receiver.It is typical for this receiver to have a resolution of 1 bits when it is specified.There is a supply voltage of 5V on the input of this transceiver module, so it can be operated from that source.A Line Driver or Receivers subcategory can be assigned to this rf transceiver module.IC5V is a high performance driver IC designed to work with a 5V power supply.An antenna transmits or sends data through 1 transmitters, which are can transceivers used to transmit radio waves to send data.
LTC490CS8#TRPBF Features
Tape & Reel (TR) package
8 pin count
8 pins
5V power supply
LTC490CS8#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC490CS8#TRPBF Drivers/Receivers/Transceivers applications.
- transmission relay
- Cordless telephone
- Wireless modems
- Telecom applications
- Aircraft navigation
- Wireless access points
- Shortwave receiver
- Cell phones
- Wireless multimedia center in smart home
- Structural bonding
