M4A3-128/64-10YI
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 100-BQFP |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4A3-128 |
| Pin Count | 100 |
| JESD-30 Code | R-PQFP-G100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 64 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Number of Gates | 5000 |
| Max Frequency | 100MHz |
| Number of Programmable I/O | 224 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 2 |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 10ns |
| Height Seated (Max) | 3.4mm |
| Length | 20mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
M4A3-128/64-10YI Overview
Currently, there are 128 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.You can find it in package [0].As a result, it has 64 I/O ports programmed.Devices are programmed with terminations of [0].There is a QUADterminal position on the electrical part in question.Power is supplied by a voltage of 3.3V volts.There is a part in the family [0].It is recommended that the chip be packaged by Tray.During operation, the operating temperature is kept at -40°C~85°C TA to ensure its reliability.Ideally, the chip should be mounted by Surface Mount.The FPGA belongs to the ispMACH? 4A series.In this chip, the 100pins are programmed.This device is also capable of displaying [0].The M4A3-128can be used to identify its related parts.There are 5000 gates, which are devices that acts as a building block for digital circuits. Optimal efficiency requires a supply voltage of [0].In general, it is recommended to store data in [0].With a maximum supply voltage of [0], it operates.The minimal supply voltage is 3V.Currently, there are 224 Programmable I/Os available.The maximal frequency should be lower than 100MHz.The status of input signals is detected by 2dedicated inputs.
M4A3-128/64-10YI Features
100-BQFP package
64 I/Os
The operating temperature of -40°C~85°C TA
100 pin count
M4A3-128/64-10YI Applications
There are a lot of Lattice Semiconductor Corporation M4A3-128/64-10YI CPLDs applications.
- Multiple DIP Switch Replacement
- Handheld digital devices
- Pattern recognition
- Multiple Clock Source Selection
- Protection relays
- Bootloaders for FPGAs
- Digital multiplexers
- ON-CHIP OSCILLATOR CIRCUIT
- Software Configuration of Add-In Boards
- Wide Vin Industrial low power SMPS
