M4A3-256/128-7FAC
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 256-BGA |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4A3-256 |
| Pin Count | 256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 128 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Gates | 10000 |
| Max Frequency | 125MHz |
| Number of Programmable I/O | 160 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 14 |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 7.5ns |
| Height Seated (Max) | 2.1mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | Non-RoHS Compliant |
M4A3-256/128-7FAC Overview
There are 256 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).It is contained in package [0].This device has 128 I/O ports programmed into it.Devices are programmed with terminations of [0].This electrical component has a terminal position of 0.A voltage of 3.3Vprovides power to the device.This part is in the family [0].It is recommended that the chip be packaged by Tray.The temperature at which it operates is set to 0°C~70°C TAin order to ensure its reliability.The chip should be mounted by Surface Mount.The ispMACH? 4Aseries FPGA is one of these types.The chip is programmed with 256 pins.Additionally, this device is capable of displaying [0].There are related parts in [0].There are 10000 gates, which are devices that acts as a building block for digital circuits. In order to maintain high efficiency, the supply voltage should be maintained at [0].It is adopted to store data in [0].A voltage of 3.6V is the maximum supply voltage for this device.With a minimal supply voltage of [0], it operates.A total of 160programmable I/Os are available.It is recommended that the maximal frequency be lower than 125MHz.There are 14 dedicated inputs used to detect the status of input signals.
M4A3-256/128-7FAC Features
256-BGA package
128 I/Os
The operating temperature of 0°C~70°C TA
256 pin count
M4A3-256/128-7FAC Applications
There are a lot of Lattice Semiconductor Corporation M4A3-256/128-7FAC CPLDs applications.
- Field programmable gate
- LED Lighting systems
- DDC INTERFACE
- Portable digital devices
- Power automation
- Software-driven hardware configuration
- Timing control
- Auxiliary Power Supply Isolated and Non-isolated
- DMA control
- PULSE WIDTH MODULATION (PWM)
