M4A3-256/128-7YC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 208-BFQFP |
| Number of Pins | 208 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 208 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4A3-256 |
| Pin Count | 208 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 128 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Gates | 10000 |
| Max Frequency | 125MHz |
| Number of Programmable I/O | 97 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 14 |
| Voltage Supply - Internal | 3V~3.6V |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| RoHS Status | Non-RoHS Compliant |
M4A3-256/128-7YC Overview
There are 256 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.It is part of the 208-BFQFP package.As a result, it has 128 I/O ports programmed.There is a 208terminations set on devices.This electrical part is wired with a terminal position of QUAD.It is powered by a voltage of 3.3V volts.This part is part of the family [0].It is recommended that the chip be packaged by Tray.It operates with the operating temperature of 0°C~70°C TA to ensure its reliability.Surface Mountshould be used for mounting the chip.FPGAs belonging to the ispMACH? 4Aseries contain this type of chip.208pins are programmed on the chip.When using this device, YEScan also be found.In accordance with the [0], its related parts are listed.A digital circuit can be constructed using 10000gates.For high efficiency, the supply voltage should be maintained at [0].It is recommended that data be stored in [0].A Surface Mountis mounted on this electronic component.The pins are [0].This device operates at a voltage of 3.6Vas its maximum supply voltage.Despite its minimal supply voltage of [0], it is capable of operating.Programmable I/Os are counted up 97.There should be a lower maximum frequency than 125MHz.To detect the status of input signals, there are 14dedicated inputs.
M4A3-256/128-7YC Features
208-BFQFP package
128 I/Os
The operating temperature of 0°C~70°C TA
208 pin count
208 pins
M4A3-256/128-7YC Applications
There are a lot of Lattice Semiconductor Corporation M4A3-256/128-7YC CPLDs applications.
- Multiple Clock Source Selection
- I2C BUS INTERFACE
- TIMERS/COUNTERS
- Synchronous or asynchronous mode
- Power automation
- Field programmable gate
- State machine control
- Address decoding
- STANDARD SERIAL INTERFACE UART
- Multiple DIP Switch Replacement
