M4A3-32/32-10VI48
| Parameters | |
|---|---|
| Package / Case | 48-LQFP |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4A3-32 |
| Pin Count | 48 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 32 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Number of Gates | 1250 |
| Max Frequency | 100MHz |
| Number of Programmable I/O | 97 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
M4A3-32/32-10VI48 Overview
32macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.The product is contained in a 48-LQFP package.There are 32 I/Os on the board.It is programmed that device terminations will be 48 .Its terminal position is QUAD.A voltage of 3.3Vprovides power to the device.There is a part included in Programmable Logic Devices.Trayis the packaging method.It operates with the operating temperature of -40°C~85°C TA to ensure its reliability.Chips should be mounted by Surface Mount.In this case, it is a type of FPGA belonging to the ispMACH? 4A series.It has 48pins programmed.This device also displays [0].The M4A3-32indicates that its related parts can be found.In digital circuits, there are 1250gates, which act as a basic building block.High efficiency requires a voltage supply of [0].For storing data, it is recommended to use [0].Surface Mountis used to mount this electronic component.The pins are [0].With a maximum supply voltage of [0], it operates.The minimal supply voltage is 3V.A total of 97 Programmable I/Os are available.Ideally, the maximal frequency should be lower than 100MHz Hz.
M4A3-32/32-10VI48 Features
48-LQFP package
32 I/Os
The operating temperature of -40°C~85°C TA
48 pin count
48 pins
M4A3-32/32-10VI48 Applications
There are a lot of Lattice Semiconductor Corporation M4A3-32/32-10VI48 CPLDs applications.
- DMA control
- Dedicated input registers
- Storage Cards and Storage Racks
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- STANDARD SERIAL INTERFACE UART
- State machine control
- DDC INTERFACE
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Digital multiplexers
- Bootloaders for FPGAs
