M4A3-512/192-10FAC
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 256-BGA |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4A3-512 |
| Pin Count | 256 |
| JESD-30 Code | S-PBGA-B256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 192 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Number of Gates | 20000 |
| Max Frequency | 100MHz |
| Number of Programmable I/O | 224 |
| Output Function | MACROCELL |
| Number of Macro Cells | 512 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 10ns |
| Height Seated (Max) | 2.1mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | Non-RoHS Compliant |
M4A3-512/192-10FAC Overview
There are 512 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.256-BGAis the package in which it resides.In this case, there are 192 I/Os programmed.The termination of a device is set to [0].The terminal position of this electrical part is BOTTOM, which serves as an important access point for passengers or freight.It is powered by a voltage of 3.3V volts.This part is included in Programmable Logic Devices.It is recommended that the chip be packaged by Tray.To ensure its reliability, the operating temperature is set to [0].Ideally, the chip should be mounted by Surface Mount.As part of the ispMACH? 4Aseries, it is a type of FPGA.There are 256pins on the chip.If you use this device, you will also find [0].The M4A3-512shows its related parts.20000gates are devices that serve as building blocks for digital circuits.The supply voltage should be maintained at 3.3V for high efficiency.In general, it is recommended to store data in [0].There is a maximum supply voltage of 3.6Vwhen the device is operating.Initially, it requires a voltage of 3Vas the minimum supply voltage.There are a total of 224 Programmable I/Os.The maximal frequency should be lower than 100MHz.
M4A3-512/192-10FAC Features
256-BGA package
192 I/Os
The operating temperature of 0°C~70°C TA
256 pin count
M4A3-512/192-10FAC Applications
There are a lot of Lattice Semiconductor Corporation M4A3-512/192-10FAC CPLDs applications.
- I/O expansion
- State machine control
- Address decoding
- Voltage level translation
- LED Lighting systems
- Cross-Matrix Switch
- PULSE WIDTH MODULATION (PWM)
- Timing control
- Boolean function generators
- Custom state machines
