M4A5-128/64-10YI
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-BQFP |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4A5-128 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 64 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Number of Gates | 5000 |
| Max Frequency | 100MHz |
| Number of Programmable I/O | 160 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 2 |
| Voltage Supply - Internal | 4.5V~5.5V |
| Height Seated (Max) | 3.4mm |
| Length | 20mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
M4A5-128/64-10YI Overview
There are 128 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.There is a 100-BQFP package containing it.In this case, there are 64 I/Os programmed.There are 100 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.QUADis the terminal position of this electrical part.The device is powered by a voltage of 5V volts.This part is part of the family [0].Ideally, the chip should be packaged by Tray.During operation, the operating temperature is kept at -40°C~85°C TA to ensure its reliability.Surface Mountshould be used for mounting the chip.As part of the ispMACH? 4Aseries, it is a type of FPGA.It is also possible to find YESwhen using this device.The M4A5-128shows its related parts.In digital circuits, there are 5000gates, which act as a basic building block.Optimal efficiency requires a supply voltage of [0].Data is stored using [0].Surface Mountmounts this electronic component.There are 100pins on it.It operates at a maximum supply voltage of 5.5V volts.A minimum supply voltage of 4.5V is required for it to operate.Currently, it is powered by 5Vsources.In total, there are 160programmable I/Os.It is recommended not to exceed 100MHzin terms of frequency.The status of input signals is determined by 2dedicated inputs.
M4A5-128/64-10YI Features
100-BQFP package
64 I/Os
The operating temperature of -40°C~85°C TA
100 pins
5V power supplies
M4A5-128/64-10YI Applications
There are a lot of Lattice Semiconductor Corporation M4A5-128/64-10YI CPLDs applications.
- Software-driven hardware configuration
- Bootloaders for FPGAs
- Timing control
- Reset swapping
- Discrete logic functions
- USB Bus
- I2C BUS INTERFACE
- Cross-Matrix Switch
- Code converters
- State machine control
