M4A5-128/64-12VNI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Weight | 657.000198mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | M4A5-128 |
| Pin Count | 100 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 64 |
| Memory Type | EEPROM |
| Propagation Delay | 12 ns |
| Turn On Delay Time | 12 ns |
| Number of Gates | 5000 |
| Max Frequency | 83.3MHz |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 2 |
| Voltage Supply - Internal | 4.5V~5.5V |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
M4A5-128/64-12VNI Overview
There are 128 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).There is a 100-LQFP package containing it.There are 64 I/Os on the board.The termination of a device is set to [0].Its terminal position is QUAD.A voltage of 5V is used as the power supply for this device.It belongs to the family [0].Package the chip by Tray.The temperature at which it operates is set to -40°C~85°C TAin order to ensure its reliability.Chips should be mounted by Surface Mount.The FPGA belongs to the ispMACH? 4A series.Chips are programmed with 100 pins.This device can also display [0].The M4A5-128indicates that related parts can be found.As a building block for digital circuits, there are 5000gates.If high efficiency is desired, the supply voltage should be kept at [0].EEPROM is adopted for storing data.In this case, Surface Mountis used to mount the electronic component.The pins are [0].In this case, the maximum supply voltage is 5.5V.Despite its minimal supply voltage of [0], it is capable of operating.In order for the device to operate, it requires 5V power supplies.It is important to make sure that the maximum frequency is less than 83.3MHz.Input signals are detected using 2dedicated inputs.
M4A5-128/64-12VNI Features
100-LQFP package
64 I/Os
The operating temperature of -40°C~85°C TA
100 pin count
100 pins
5V power supplies
M4A5-128/64-12VNI Applications
There are a lot of Lattice Semiconductor Corporation M4A5-128/64-12VNI CPLDs applications.
- DDC INTERFACE
- Page register
- Power up sequencing
- I/O PORTS (MCU MODULE)
- ToR/Aggregation/Core Switch and Router
- White goods (Washing, Cold, Aircon ,...)
- POWER-SAVING MODES
- Bootloaders for FPGAs
- ROM patching
- High speed graphics processing
