M4A5-256/128-10YNC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 208-BFQFP |
| Number of Pins | 208 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 208 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4A5-256 |
| Pin Count | 208 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 128 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Number of Gates | 10000 |
| Max Frequency | 125MHz |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 14 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
M4A5-256/128-10YNC Overview
There are 256 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).The item is packaged with 208-BFQFP.The device is programmed with 128 I/O ports.208terminations have been programmed into the device.As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.It is powered by a voltage of 5V volts.There is a part in the family [0].It is recommended to package the chip by Tray.Due to its reliability, it is operated at a temperature of [0].It is recommended that the chip be mounted by Surface Mount.In this case, it is a type of FPGA belonging to the ispMACH? 4A series.It has 208pins programmed.It is also characterized by YES.M4A5-256contains its related parts.The 10000gates serve as building blocks for digital circuits.In order to achieve high efficiency, the supply voltage should be maintained at [0].It is recommended to store data in [0].A Surface Mountis mounted on this electronic component.208pins are included in its design.This device operates at a voltage of 5.25Vas its maximum supply voltage.Normally, it operates with a voltage of 4.75VV as its minimum supply voltage.This device runs on 5Vvolts of electricity.It is important to make sure that the maximum frequency is less than 125MHz.To detect the status of input signals, there are 14dedicated inputs.
M4A5-256/128-10YNC Features
208-BFQFP package
128 I/Os
The operating temperature of 0°C~70°C TA
208 pin count
208 pins
5V power supplies
M4A5-256/128-10YNC Applications
There are a lot of Lattice Semiconductor Corporation M4A5-256/128-10YNC CPLDs applications.
- Timing control
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Protection relays
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- TIMERS/COUNTERS
- Software Configuration of Add-In Boards
- Complex programmable logic devices
- Discrete logic functions
- Digital designs
