M4A5-32/32-5JC
| Parameters | |
|---|---|
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 32 |
| Memory Type | EEPROM |
| Propagation Delay | 5 ns |
| Number of Gates | 1250 |
| Max Frequency | 167MHz |
| Number of Programmable I/O | 256 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.75V~5.25V |
| Height Seated (Max) | 4.572mm |
| Length | 16.5862mm |
| Width | 16.5862mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Number of Pins | 44 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M4A5-32 |
| Pin Count | 44 |
M4A5-32/32-5JC Overview
The mobile phone network has 32 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).There is a 44-LCC (J-Lead) package containing it.As a result, it has 32 I/O ports programmed.The device is programmed with 44 terminations.This electrical part has a terminal position of QUADand is connected to the ground.Power is provided by a supply voltage of 5V volts.It is included in Programmable Logic Devices.Tubeshould be used for packaging the chip.To ensure reliability, the device operates at a temperature of [0].Ensure that the chip is mounted by Surface Mount.It is a type of FPGA belonging to the ispMACH? 4A series.In this chip, the 44pins are programmed.The device can also be used to find [0].The M4A5-32indicates that its related parts can be found.There are 1250 gates, which are devices that acts as a building block for digital circuits. For high efficiency, the supply voltage should be maintained at [0].EEPROM is adopted for storing data.The electronic part is mounted by Surface Mount.It is designed with 44 pins.A maximum voltage of 5.25Vis required for operation.A minimum supply voltage of 4.75V is required for this device to operate.It runs on a voltage of 5Vvolts.Currently, there are 256 Programmable I/Os available.Ideally, the maximal frequency should be lower than 167MHz Hz.
M4A5-32/32-5JC Features
44-LCC (J-Lead) package
32 I/Os
The operating temperature of 0°C~70°C TA
44 pin count
44 pins
5V power supplies
M4A5-32/32-5JC Applications
There are a lot of Lattice Semiconductor Corporation M4A5-32/32-5JC CPLDs applications.
- Multiple Clock Source Selection
- DDC INTERFACE
- ROM patching
- D/T registers and latches
- Cross-Matrix Switch
- Discrete logic functions
- Digital designs
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Dedicated input registers
- Digital systems
