M5-128/68-7VC/1
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1995 |
| Series | MACH® 5 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M5-128 |
| Pin Count | 100 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 68 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 7.5 ns |
| Number of Gates | 5000 |
| Max Frequency | 167MHz |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.75V~5.25V |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
M5-128/68-7VC/1 Overview
This network has 128macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).There is a 100-LQFP package containing it.This device has 68 I/O ports programmed into it.The termination of a device is set to [0].The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.Power is provided by a supply voltage of 5V volts.It is a part of family [0].It is recommended to package the chip by Tray.To ensure its reliability, the operating temperature is set to [0].The chip should be mounted by Surface Mount.The MACH? 5series comprises this type of FPGA.There are 100pins on the chip.It is also characterized by YES.According to the M5-128, its related parts can be found.There are 5000 gates, which are devices that acts as a building block for digital circuits. In order to maintain high efficiency, the supply voltage should be maintained at [0].In this case, EEPROMwill be used to store the data.The electronic part is mounted by Surface Mount.This board has 100 pins.It operates at a maximum supply voltage of 5.25V volts.With a minimal supply voltage of [0], it operates.A power supply of 5Vvolts is required to operate this device.It is recommended that the maximal frequency be lower than 167MHz.
M5-128/68-7VC/1 Features
100-LQFP package
68 I/Os
The operating temperature of 0°C~70°C TA
100 pin count
100 pins
5V power supplies
M5-128/68-7VC/1 Applications
There are a lot of Lattice Semiconductor Corporation M5-128/68-7VC/1 CPLDs applications.
- Battery operated portable devices
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- PULSE WIDTH MODULATION (PWM)
- Address decoding
- Synchronous or asynchronous mode
- Software Configuration of Add-In Boards
- Digital multiplexers
- Voltage level translation
- D/T registers and latches
- Multiple DIP Switch Replacement
