M5-256/68-5VC/1
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1995 |
| Series | MACH® 5 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | M5-256 |
| Pin Count | 100 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 68 |
| Memory Type | EEPROM |
| Propagation Delay | 5.5 ns |
| Turn On Delay Time | 5.5 ns |
| Number of Gates | 10000 |
| Max Frequency | 200MHz |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.75V~5.25V |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
M5-256/68-5VC/1 Overview
There are 256 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).A 100-LQFP package contains the item.This device has 68 I/O ports programmed into it.The termination of a device is set to [0].There is a QUADterminal position on the electrical part in question.An electrical supply voltage of 5V is used to power it.The part is included in Programmable Logic Devices.Package the chip by Tray.The temperature at which it operates is set to 0°C~70°C TAin order to ensure its reliability.Ideally, the chip should be mounted by Surface Mount.This type of FPGA is a part of the MACH? 5 series.It is programmed with 100 pins.This device is also capable of displaying [0].The M5-256can be used to identify its related parts.A digital circuit is built using 10000gates.Optimal efficiency requires a supply voltage of [0].In this case, EEPROMwill be used to store the data.The electronic part is mounted by Surface Mount.It is designed with 100 pins.There is a maximum supply voltage of 5.25Vwhen the device is operating.Despite its minimal supply voltage of [0], it is capable of operating.A power supply of 5Vvolts is required to operate this device.It should be below 200MHzat the maximal frequency.
M5-256/68-5VC/1 Features
100-LQFP package
68 I/Os
The operating temperature of 0°C~70°C TA
100 pin count
100 pins
5V power supplies
M5-256/68-5VC/1 Applications
There are a lot of Lattice Semiconductor Corporation M5-256/68-5VC/1 CPLDs applications.
- Battery operated portable devices
- I2C BUS INTERFACE
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- State machine design
- Programmable polarity
- Custom shift registers
- Pattern recognition
- Discrete logic functions
- Digital multiplexers
- Synchronous or asynchronous mode
