M5LV-256/160-7YC
| Parameters | |
|---|---|
| Width | 28mm |
| RoHS Status | Non-RoHS Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 208-BFQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1995 |
| Series | MACH® 5 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 208 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | M5LV-256 |
| Pin Count | 208 |
| JESD-30 Code | S-PQFP-G208 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 160 |
| Memory Type | EEPROM |
| Propagation Delay | 7.5 ns |
| Number of Gates | 10000 |
| Max Frequency | 100MHz |
| Number of Programmable I/O | 144 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 7.5ns |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
M5LV-256/160-7YC Overview
Currently, there are 256 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.In the 208-BFQFPpackage, you will find it.In this case, there are 160 I/Os programmed.Devices are programmed with terminations of [0].This electrical component has a terminal position of 0.Power is provided by a supply voltage of 3.3V volts.This part is part of the family [0].Trayshould be used to package the chip.The device operates at a temperature of 0°C~70°C TAin order to ensure its reliability.Surface Mountshould be used for mounting the chip.The MACH? 5series FPGA is one of these types.The chip is programmed with 208 pins.When using this device, YESis also available.The M5LV-256contains its related parts.In digital circuits, 10000gates serve as building blocks.A high level of efficiency can be achieved by maintaining the supply voltage at [0].It is recommended that data be stored in [0].A voltage of 3.6V is the maximum supply voltage for this device.Despite its minimal supply voltage of [0], it is capable of operating.In total, there are 144programmable I/Os.It is important to make sure that the maximum frequency is less than 100MHz.
M5LV-256/160-7YC Features
208-BFQFP package
160 I/Os
The operating temperature of 0°C~70°C TA
208 pin count
M5LV-256/160-7YC Applications
There are a lot of Lattice Semiconductor Corporation M5LV-256/160-7YC CPLDs applications.
- Page register
- ROM patching
- USB Bus
- Reset swapping
- State machine design
- Preset swapping
- Digital systems
- Storage Cards and Storage Racks
- Parity generators
- Dedicated input registers
