M74HC161B1R
| Parameters | |
|---|---|
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | TCO OUTPUT |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Frequency | 62MHz |
| Base Part Number | M74HC161 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Propagation Delay | 21 ns |
| Turn On Delay Time | 300 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Trigger Type | Positive Edge |
| Number of Input Lines | 4 |
| fmax-Min | 25 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Timing | Synchronous |
| Height | 4.59mm |
| Length | 20mm |
| Width | 7.1mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
M74HC161B1R Overview
A device of this type is supplied in a package of type [0]. 16 terminations are used for its configuration. 4.5Vis fully flexible due to its voltage supply. The 1elements are connected by wires. There are a total of 16 pins in all components. Packaging is based on Tube. Circuit components are connected with 16pins. It is mounted in the direction of [0]. Initially, it appears to belong to the HC/UH family. With its 74HCseries designation, it can be used for a range of applications. Binary Counteris selected as the logic type. A temperature of -55°C~125°Cshould be set for the operating environment. Mounting type Through Holeis used. In the presence of the supply voltage of [0], it can operate more reliably. The device contains information consisting of 4bits. The result may be yeswhen expressing the result in Pbfree code. This electronic device is equipped with the following features [0]. There are more related parts under the M74HC161base part number. From the voltage source, there is a voltage of 2/6V volts. To operate, the device requires a voltage of [0]. The minimum supply voltage (Vsup) is as low as 2V. It operates at a frequency of 62MHz Hz. There is 6V maximum supply voltage (Vsup) allowed. The 4input lines are used to input binary data as on/off signals.
M74HC161B1R Features
Embedded in the 16-DIP (0.300, 7.62mm) package
TCO OUTPUT
Operating supply voltage of 5V
Frequency of 62MHz
M74HC161B1R Applications
There are a lot of STMicroelectronics M74HC161B1R Counters & Dividers applications.
- Binary counter/decoder
- ALGEBRAIC COMPUTATION
- Time Out Timer for Consumer-Application Industrial Controls
- POWER COMPUTATION
- Programmable decade counters
- Divide-by-N counting
- VHF, UHF, FM, AM, etc.
- Up Counters
- DIVISION
- ANALOG SIGNAL PROCESSING
