M74HC590B1R
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 1.627801g |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | TCO OUTPUT; REGISTERED OUTPUTS |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Frequency | 61MHz |
| Base Part Number | M74HC59 |
| Pin Count | 16 |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Number of Bits | 8 |
| Propagation Delay | 280 ns |
| Turn On Delay Time | 280 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Number of Inputs | 5 |
| Direction | Up |
| Logic Type | Binary Counter |
| Max I(ol) | 0.006 A |
| Trigger Type | Positive Edge |
| Number of Output Lines | 3 |
| fmax-Min | 26 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Height | 4.59mm |
| Length | 20mm |
| Width | 7.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
M74HC590B1R Overview
A 16-DIP (0.300, 7.62mm)package is used for this device. There are 16terminations used for configuring it. The supply voltage of 4.5V enables it operate in a fully flexible way. An interconnection of 1elements is provided by wires. All component pins are equal to 16. Tubeis used to package it. There are 16 pins going on to connect other parts in the circuit. It is mounted in the manner of [0]. It emerges as a member of HC/UH family. Having been designed as a member of the 74HCseries, it is well suited for use in a wide range of applications. It is adopted that the logic type is [0]. Setting the operating temperature to -55°C~125°C is recommended. A mounting type of Through Holeis adopted. As a result, the device operates more reliably when a supply voltage of 2V~6Vis applied. There are 8bits of information contained in the device. It is possible for the result to be yesin Pbfree code. In terms of this electronic device, the features provided by TCO OUTPUT; REGISTERED OUTPUTSare of the utmost importance. Further related parts may be found under the base part number M74HC59. The voltage source produces 2/6Vvoltage. Supply voltages can be as low as 2V volts (Vsup). With a frequency of [0], it operates. The maximum supply voltage (Vsup) is up to 6V. There are 3output lines on the device. In order to operate normally, it is designed with circuits with 8values. In this case, the system has received 5 outputs.
M74HC590B1R Features
Embedded in the 16-DIP (0.300, 7.62mm) package
TCO OUTPUT; REGISTERED OUTPUTS
Frequency of 61MHz
M74HC590B1R Applications
There are a lot of STMicroelectronics M74HC590B1R Counters & Dividers applications.
- MULTIPLICATION
- Analog multiplexing and demultiplexing
- Control counters
- Clocks
- counting/frequency sy nthesizers-BCD output
- Divide-by-N counting
- Frequency dividers
- Up Counters
- POWER COMPUTATION
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
