M74HCT373TTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | M74HCT373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 36 ns |
| Turn On Delay Time | 19 ns |
| Family | HCT |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 6mA 6mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.006 A |
| Prop. Delay@Nom-Sup | 45 ns |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
M74HCT373TTR Overview
It is embedded in the 20-TSSOP (0.173, 4.40mm Width) package. This package has the format of Tape & Reel (TR). In its configuration, Tri-State is used as the output. In this electrical device, the logic type is D-Type Transparent Latch. According to Surface Mount, this electronic part is mounted. A 4.5V~5.5V supply voltage is required to operate it. It operates at -55°C~125°C degrees Celsius. The 74HCT series contains FPGAs of this type. This electronic part is designed with 8 Bits. A device with this design has 20 terminations. It is a member of the M74HCT373 family. With a supply voltage of 5V, it operates. 20 pins are available on it. This electronic device is categorized as a HCT electronic device. With the design of the board, there are only 20 pins. Surface Mount is the way in which this electronic part is mounted. In this device, there are 2 ports. The part is in the FF/Latches subcategory. A total of 5V power supplies are needed to run it. It contains 8 input lines where electronic circuits are present. Based on its reliable performance, this device is appropriate for TAPE AND REEL. Optimal efficiency requires 5V as the supply voltage. Input lines are converted into binary equivalents by 3 output lines.
M74HCT373TTR Features
20-TSSOP (0.173, 4.40mm Width) package
74HCT series
8 Bits
M74HCT373 family
20 pin count
20 pins
5V power supplies
M74HCT373TTR Applications
There are a lot of STMicroelectronics M74HCT373TTR Latches applications.
- Phase comparator
- Parallel Input
- Pseudo-random code generators
- Address register
- Automotive Body Electronics
- Buffer Storage
- Bus system register with enable parallel lines at bus side
- Automotive ADAS
- Parallel Input
- Clocks
