M74HCT374B1R
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HCT |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Base Part Number | 74HCT374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 50MHz |
| Propagation Delay | 38 ns |
| Turn On Delay Time | 25 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop, Latch |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 6mA 6mA |
| Max I(ol) | 0.006 A |
| Max Propagation Delay @ V, Max CL | 38ns @ 4.5V, 150pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
M74HCT374B1R Overview
It is embeded in 20-DIP (0.300, 7.62mm) case. The Tubepackage contains it. As configured, the output uses Tri-State, Non-Inverted. JK flip flop uses Positive Edgeas the trigger. There is an electrical part that is mounted in the way of Through Hole. A voltage of 4.5V~5.5Vis required for its operation. It is operating at -55°C~125°C TA. A flip flop of this type is classified as a D-Type. The 74HCTseries comprises this type of FPGA. There should be no greater frequency than 50MHzon its output. D latch consists of 1 elements. It consumes 4μA of quiescent In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. This D latch belongs to the family of 74HCT374. The power supply voltage is 5V. Its input capacitance is 5pFfarads. An electronic device belonging to the family HCTcan be found here. The electronic part is mounted in the way of Through Hole. This board has 20 pins. Its clock edge trigger type is Positive Edge. The part you are looking for is included in FF/Latches. There are 8bits in its design. Its superior flexibility is attributed to its use of 8 circuits. The D latch operates on 5V volts. This flip flop has a total of 2ports. The supply voltage should be maintained at 5V for high efficiency. There are no output lines on the JK flip flop.
M74HCT374B1R Features
Tube package
74HCT series
20 pins
8 Bits
5V power supplies
M74HCT374B1R Applications
There are a lot of STMicroelectronics M74HCT374B1R Flip Flops applications.
- Safety Clamp
- Balanced Propagation Delays
- Single Up Count-Control Line
- Control circuits
- CMOS Process
- Registers
- Cold spare funcion
- ESD performance
- Differential Individual
- Single Down Count-Control Line
