MAX13431EEUB+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Line Driver or Receivers |
| Technology | BICMOS |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX13431 |
| Pin Count | 10 |
| Operating Supply Voltage | 5V |
| Interface | RS-485 |
| Operating Supply Current | 2mA |
| Nominal Supply Current | 2mA |
| Data Rate | 16Mbps |
| Differential Output | YES |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 15mV |
| Number of Transceivers | 1 |
| Receive Delay-Max | 80 ns |
| Simplex/Duplex | Half Duplex |
| Transmit Delay-Max | 50 ns |
| Max Junction Temperature (Tj) | 150°C |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
MAX13431EEUB+ Overview
The enhanced 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package makes it an excellent LED driver.The Tube package houses this receiver.Since this is a Transceiver can transceiver, many solutions can use it for a variety of functions.This wide receiver can be placed on any Surface Mount-type PCB or development board.A differential driver like this uses 3V~5.5V of power.This electronic part can have?up to 1/1 eligible receivers/drivers on the field at once.?The operating temperature of this ic receiver is -40°C~85°C. It is primarily designed for applications with low temperatures.With a supply voltage range of 1.8V, this line driver ic operates efficiently.There are 10 terminations in this wide receiver so that signals can be driven from the data and received.In this package, you will find 10 market-standard pinouts for this transceiver.For more variants of this part, try searching with the base part number MAX13431, which indicates the product type, temperature, package, etc.This is a 10-pin driver IC with enhanced power dissipation control.A combination of optical transceiver downsizing and high-density Surface Mount mounting reduces the package size dramatically.It is important to note that this ic receiver had a maximum resolution of 1 bits.It is typical for this receiver to have a resolution of 1 bits when it is specified.As a result of the design of this transceiver module, the input voltage supply is designed to operate at 5V.3 volts.A rf transceiver module named Line Driver or Receivers belongs to this subcategory.ICs implement a total of 1 transceivers.It is capable of driving LEDs with a voltage of 2mA as the input voltage to this integrating circuit.
MAX13431EEUB+ Features
Tube package
10 pin count
10 pins
MAX13431EEUB+ Applications
There are a lot of Maxim Integrated MAX13431EEUB+ Drivers/Receivers/Transceivers applications.
- Wireless security systems
- Fiber optic cable connection network
- Shortwave receiver
- interconnection between computers
- Cell phones
- Remote controls
- Cable network front end
- Long-distance fiber optic network applications
- Carrier phase observations
- Aircraft navigation
