MAX14756EUE+

60μs, 3μs SPST - NC 10Ohm Analog Switches BREAK-BEFORE-MAKE MAX14756 16 Pins 2.5nA 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX14756EUE+
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 704
Description: 60μs, 3μs SPST - NC 10Ohm Analog Switches BREAK-BEFORE-MAKE MAX14756 16 Pins 2.5nA 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Weight	172.98879mg
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2011
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	10Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	889mW
Technology	BICMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	MAX14756
Output	SEPARATE OUTPUT
Pin Count	16
Number of Channels	1
Number of Circuits	4
Max Supply Voltage	70V
Min Supply Voltage	10V
Operating Supply Current	500μA
Max Supply Current	800μA
Throw Configuration	SPST
Turn On Delay Time	60 μs
Voltage - Supply, Single/Dual (±)	10V~70V ±10V~35V
Supply Type	Dual, Single
Turn-Off Delay Time	3 μs
Max Dual Supply Voltage	35V
-3db Bandwidth	145MHz
On-State Resistance (Max)	10Ohm
Min Dual Supply Voltage	10V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	65 dB
Current - Leakage (IS(off)) (Max)	2.5nA
Channel Capacitance (CS(off), CD(off))	35pF
On-state Resistance Match-Nom	0.3Ohm
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	60μs, 3μs
Charge Injection	580pC
Channel-to-Channel Matching (ΔRon)	300m Ω
Crosstalk	-96dB @ 10MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	60000ns
Switch-off Time-Max	3000ns
Normal Position	NC
Height	950μm
Length	5.1mm
Width	4.5mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant

MAX14756EUE+ Overview

Presented in 16-TSSOP (0.173, 4.40mm Width), this electrical component is convenient for overseas shipping. This packaging method provides high reliability because it uses advanced packaging techniques. This analog switch is mounted in Surface Mount. Multiplexer and demultiplexer circuits have a number 1:1. Increasing operating temperature to around -40°C~85°C TA. A total of 16 terminations have been recorded. A electrical component with 1 channels is capable of high-quality output. It is part of the design of the 16 series that this electronic component is included. The analog switch ics are built using SPST - NC switching circuits. A total of 4 circuits make up this switch device. Use MAX14756 to search for variants of the digital switches. There is 10Ohm internal resistance in this digital multiplexer. Datasheets for 16 pin functions are available upon request. Multiplexer or Switches is a typical switch device. It is generally not recommended to supply a voltage higher than 70V to the switch device in normal circumstances. A cost-effective Dual, Single supply type analogue multiplexer. A low voltage of 10V should be applied to the electronic component. 500μA current would be enough for this multiplexer to operate. The switch multiplexer may be damaged if it is exposed to voltage greater than 800μA. Despite this switch's dual supply capability, its voltage should not exceed 35V. A dual power supply should have at least 10V voltage attached. A total of SEPARATE OUTPUT outputs are available on this analog switch ic.