MAX148BEAP+

10 Bit 0.65mm ADC MAX148 3V 20-SSOP (0.209, 5.30mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX148BEAP+
Package: 20-SSOP (0.209, 5.30mm Width)
Datasheet: PDF
Stock: 572
Description: 10 Bit 0.65mm ADC MAX148 3V 20-SSOP (0.209, 5.30mm Width) (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	20-SSOP (0.209, 5.30mm Width)
Number of Pins	20
Operating Temperature	-40°C~85°C
Packaging	Tube
Published	2012
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	20
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Subcategory	Analog to Digital Converters
Max Power Dissipation	640mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	MAX148
Pin Count	20
Operating Supply Voltage	5.25V
Polarity	Bipolar, Unipolar
Power Supplies	3/5V
Configuration	MUX-S/H-ADC
Interface	SPI, Serial
Number of Bits	10
Input Type	Differential, Single Ended
Architecture	SAR
Number of Inputs	4, 8
Converter Type	ADC, SUCCESSIVE APPROXIMATION
Supply Type	Single
Reference Type	External
Data Interface	SPI
Resolution	1.25 B
Sampling Rate	133 ksps
Voltage - Supply, Analog	2.7V~5.25V
Voltage - Supply, Digital	2.7V~5.25V
Number of Analog In Channels	8
Sampling Rate (Per Second)	133k
Output Bit Code	BINARY, 2'S COMPLEMENT BINARY
Linearity Error-Max (EL)	0.0977%
Sample and Hold / Track and Hold	SAMPLE
Number of A/D Converters	1
Conversion Rate	133 ksps
Ratio - S/H:ADC	1:1
Length	7.2mm
Width	5.29mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MAX148BEAP+ Overview

The analogue to digital converter is designed with 10 Bits.The AD converter is embedded in the 20-SSOP (0.209, 5.30mm Width) package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 20 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 3V.The A/D converter has 8 channels.The is equipped with 20 pin count.The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 133k Hz.The input type of this electronic AD converter is Differential, Single Ended.There are External reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for SAMPLE time.The architecture that analogue to digital converter's core adopts is SAR.There are 20 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 2.7V~5.25V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1.25 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to MAX148 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.Single is a coding scheme for identifying supply types.The supply/digital voltage of this electrical AD converter is 2.7V~5.25V.Surface Mount is a device that can be mounted on the digital converter.4, 8 inputs are employed.This electrical digital converter operates from a supply voltage of 5.25V.The ADC converter operates from 3/5V power supplies. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 640mW.The conversion rate of this electrical AD converter is calculated as 133 ksps.There are 1 A/D converters, which are used to convert an analog signal like voltage to digital form so that it can be read and processed by a microcontroller.