MAX1494CCJ+
| Parameters | |
|---|---|
| Interface | Serial |
| Number of Circuits | 1 |
| Operating Supply Current | 960μA |
| Nominal Supply Current | 580μA |
| Number of Bits | 4 |
| Converter Type | ADC, PROPRIETARY METHOD |
| Resolution | 0.5625 B |
| Sampling Rate | 5 sps |
| Number of Analog In Channels | 1 |
| Output Bit Code | 2'S COMPLEMENT BINARY |
| Display Type | LCD |
| Conversion Rate | 2.5 sps |
| Analog Input Voltage-Max | 2.2V |
| Analog Input Voltage-Min | -2.2V |
| Digits or Characters | A/D 4.5 Digits |
| Length | 7mm |
| Width | 7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-LQFP |
| Number of Pins | 32 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tray |
| Published | 1999 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 32 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Analog to Digital Converters |
| Max Power Dissipation | 1.6529W |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~5.25V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX1494 |
| Pin Count | 32 |
| Polarity | Bipolar |
| Power Supplies | 3/5V |
| Configuration | 7 Segment + 2 Annunciators |
MAX1494CCJ+ Overview
Display drivers is packaged in the way of Tray.There is a version 32-LQFP of the package that includes it as part of it.I would like to point out that this electrical device has a LCD display type.On this electronic component, Surface Mount is used for mounting.Its operating temperature is 0°C~70°C.Display drivers should work wDisplay driversh a 2.7V~5.25VV power supply.Transmission lines are terminated with 32 terminations using devices whose characteristic impedance matches that of the transmission line.A MAX1494 device is one of those in the MAX1494 family.A 32 pin makes up the entire device.As a result, it has 32 pins.An electronic component is mounted on a board by way of a Surface Mount-axis using the Surface Mount-axis as a guide.The power source is powered by voltage 3.3V.If 960μA is to function properly, it must be supplied with current.The same can also be done with Analog to Digital Converters.Due to its two 3/5V power supplies, it can run anywhere in the world.Input voltage and output voltage are taken into account when the ADC, PROPRIETARY METHOD converter is selected.The electromagnetic spectrum has 1 analog In channels, which mean bandwidth.An electronic part of this design was made using 4 Bits.
MAX1494CCJ+ Features
32-LQFP package
MAX1494 family
32 pin count
32 pins
3/5V power supplies
ADC, PROPRIETARY METHOD converters
MAX1494CCJ+ Applications
There are a lot of Maxim Integrated MAX1494CCJ+ display drivers applications.
- Driving common-cathode LED displays
- Instrument Clusters
- Wal4 and table clocks
- Remote Displays
- Test Equipment
- Instrumentation Industrial Control
- White Goods Industrial Weighing
- Bar Graphs and Matrix Displays
- Bar-Graph Displays
- Professional Audio Equipment
