MAX202CDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Subcategory | Line Driver or Receivers |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | MAX202 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Operating Supply Current | 15mA |
| Nominal Supply Current | 15mA |
| Logic Function | Receiver, Transceiver |
| Data Rate | 120Kbps |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| ESD Protection | Yes |
| Simplex/Duplex | Full Duplex |
| Supply Voltage1-Nom | 5V |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX202CDR Overview
Designed for common LEDs, this driver IC features an enhanced 16-SOIC (0.154, 3.90mm Width) package.Tape & Reel (TR) package is used to mount this receiver.Several solutions have used this Transceiver can transceiver in a variety of applications due to its Transceiver IC nature.On any Surface Mount-type PCB or development board, this wide receiver can be placed.This differential driver requires a 4.5V~5.5V power supply.Up to 2/2 receivers/drivers can be installed simultaneously on this electronic part.As its name implies, this ic receiver is designed for applications where 0°C~70°C is the operating temperature.There is a voltage range of 5V for this line driver ic, so it can operate efficiently.Integrated into this wide receiver are 16 terminations that are used for driving and receiving signals from data.In this package, you will find 16 market-standard pinouts for this transceiver.With the part number MAX202 identifying the product type, temperature, package, etc., you can search with it to see more variants.It is a 16-pin driver IC with enhanced power dissipation controls.Package size is drastically reduced by downsizing ICs and mounting them in high-density Surface Mount arrays.As a rule of thumb, this receiver is typically specified with a resolution of 2 bits.An input voltage supply of 5V is required to operate the transceiver module.In this category, this rf transceiver module belongs to the Line Driver or Receivers subcategory.This driver IC is designed to operate from a 5V power supply.Transceivers implemented by this IC total 1 in total.On the part, 2 drivers are embedded in order to facilitate the operation of the device.Using a 15mA input voltage, this integrating circuit is capable of driving LEDs with an output voltage of 20 V.
MAX202CDR Features
Tape & Reel (TR) package
16 pin count
16 pins
5V power supply
MAX202CDR Applications
There are a lot of Texas Instruments MAX202CDR Drivers/Receivers/Transceivers applications.
- Wireless access points
- Precision geodetic measurement
- IP cameras
- Wired telephone
- IPTV front end
- interconnection between switches
- Wireless HD Photography
- Wireless security systems
- Vehicle
- VoIP phones
