MAX202CDW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Weight | 420.395078mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | MAX202 |
| Pin Count | 16 |
| Output Voltage | 9V |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Nominal Supply Current | 15mA |
| Output Current | 60mA |
| Logic Function | Receiver, Transceiver |
| Data Rate | 120Kbps |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| Simplex/Duplex | Full Duplex |
| Supply Voltage1-Nom | 5V |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX202CDW Overview
This LED driver IC features an enhanced 16-SOIC (0.295, 7.50mm Width) package for driving common LEDs.The receiver is packaged in a Tube package.Since this part is a Transceiver can transceiver, a number of solutions have been able to utiliTransceivere it for various purposes.Any Surface Mount-type PCB or development board can be used with this wide receiver.Power supply for this differential driver is 4.5V~5.5V.As many as 2/2 eligible receivers/drivers can be used simultaneously with this electronic part.This ic receiver has been primarily designed for applications where the operating temperature is 0°C~70°C.With a supply voltage range of 5V, this line driver ic operates efficiently.In order to drive and receive signals from data, this wide receiver has 16 terminations integrated.This transceiver is packaged with 16 market standard pinoutsFor more variants of this part, try searching with the base part number MAX202, which indicates the product type, temperature, package, etc.An enhanced power dissipation driver IC with 16 pins.Through optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size is reduced dramatically.As a rule of thumb, this receiver is typically specified with a resolution of 2 bits.There is a voltage input supply of 5V required for the operation of this integrated circuit.Line Driver or Receivers is a subcategory of this rf transceiver module.IC5V is a high performance driver IC designed to work with a 5V power supply.ICs implement a total of 1 transceivers.The integrator circuit is embedded with 2 drivers.There is a capabilWide receivery to deliver voltage at 9V wWide receiverh this device.This bluetooth transceiver provides an output current of 60mA.
MAX202CDW Features
Tube package
16 pin count
16 pins
5V power supply
MAX202CDW Applications
There are a lot of Texas Instruments MAX202CDW Drivers/Receivers/Transceivers applications.
- Satellite communication
- Changeing the frequency from IF to RF
- transmission relay
- Wireless 3D game
- Car alarm systems
- Home theater wiring-free
- Cell phones
- Car radio
- Precision geodetic measurement
- Cable network front end
