MAX207IDWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 5V |
| Base Part Number | MAX207 |
| Pin Count | 24 |
| Output Voltage | 9V |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Nominal Supply Current | 20mA |
| Output Current | 10mA |
| Propagation Delay | 2 μs |
| Logic Function | Receiver, Transceiver |
| Data Rate | 120Kbps |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 5/3 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Number of Drivers | 5 |
| Number of Transceivers | 1 |
| Simplex/Duplex | Full Duplex |
| Supply Voltage1-Nom | 5V |
| Number of Receivers | 3 |
| High Level Input Current-Max | 0.0002A |
| Height | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX207IDWR Overview
This LED driver IC features an enhanced 24-SOIC (0.295, 7.50mm Width) package for driving common LEDs.The Tape & Reel (TR) package houses this receiver.As a Transceiver can transceiver, this part has enabled many applications to be served.This wide receiver can be placed on any Surface Mount-type PCB or development board.Power supply for this differential driver is 4.75V~5.25V.During operation, this electronic part may have up to 5/3 eligible receivers/drivers.The operating temperature of this ic receiver is -40°C~85°C. It is primarily designed for applications with low temperatures.With a supply voltage range of 5V, this line driver ic operates efficiently.There are 24 terminations in this wide receiver so that signals can be driven from the data and received.As a standard package, this transceiver comes with a 24-pin layout that follows the market standard.As the base part number MAX207 identifies the product type, temperature, package, etc., you can try searching with it to get more variants of this part.An enhanced power dissipation control is provided by this 24-pin driver IC.Its package size is drastically reduced by downsizing ICs and utilizing high-density Surface Mount mounting techniques.There is a supply voltage of 5V on the input of this transceiver module, so it can be operated from that source.It is possible to subcategoriLine Driver or Receiverse this rf transceiver module as Line Driver or Receivers.Driver ICs are designed to work with a 5V power supply and this driver IC is one of them.It implements 1 transceivers in total.This rf transceiver module can have?up to 3 eligible receivers on the field at once.?On the integrator circuit are embedded 5 drivers.At 9V, Wide receiver is able to deliver voltage to the load.In this bluetooth transceiver, we are able to get a maximum output current of 10mA.
MAX207IDWR Features
Tape & Reel (TR) package
24 pin count
24 pins
5V power supply
MAX207IDWR Applications
There are a lot of Texas Instruments MAX207IDWR Drivers/Receivers/Transceivers applications.
- Optical sub-assembly (OSA)
- Aircraft positioning
- Car radio
- Gigabit Ethernet
- Laser diode bonding
- Servers
- Aircraft navigation
- Copper connection network
- Switches
- Wireless HD Photography
