MAX213ECWI+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX213 |
| Pin Count | 28 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Supply Current-Max | 20mA |
| Data Rate | 120Kbps |
| Output Characteristics | 3-STATE |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 4/5 |
| Driver Number of Bits | 4 |
| Receiver Number of Bits | 5 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Receive Delay-Max | 40000 ns |
| Output Low Current-Max | 0.0016A |
| Out Swing-Min | 10 V |
| Height Seated (Max) | 2.65mm |
| Length | 17.9mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX213ECWI+ Overview
An excellent driver IC for common LEDs thanks to its enhanced 28-SOIC (0.295, 7.50mm Width) package.There is a Tube package for this receiver.With its Transceiver can transceiver design, this part can be incorporated into a wide range of solutions.Any Surface Mount-type PCB or development board can be used with this wide receiver.This differential driver uses 4.5V~5.5V for power supply.The field can have up to 4/5 eligible receivers/drivers at once when using this electronic part.The operating temperature of this ic receiver is 0°C~70°C. It is primarily designed for applications with low temperatures.With a supply voltage range of 5V, this line driver ic operates efficiently.In order to drive and receive signals from data, this wide receiver has 28 terminations integrated.As a standard package, this transceiver comes with a 28-pin layout that follows the market standard.As the base part number MAX213 identifies the product type, temperature, package, etc., you can try searching with it to get more variants of this part.A 28-pin driver IC with enhanced power dissipation control is featured here.It was possible to achieve a 4-bit resolution through this ic receiver.Typically, the resolution of this receiver is specified to be 5 bits.In this category, this rf transceiver module belongs to the Line Driver or Receivers subcategory.IC5V is a high performance driver IC designed to work with a 5V power supply.Ensure that the VCC pin of the ic receiver receives sufficient but not more than 20mA of input current.
MAX213ECWI+ Features
Tube package
28 pin count
28 pins
5V power supply
MAX213ECWI+ Applications
There are a lot of Maxim Integrated MAX213ECWI+ Drivers/Receivers/Transceivers applications.
- IP cameras
- Switching system
- Indoor ad hoc meeting
- Long-distance fiber optic network applications
- Tuner
- Wireless network systems
- Portable radio
- Precision engineering measurement
- Laser diode bonding
- Ship
