MAX221EEUE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX221 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-232 |
| Number of I/O | 4 |
| Nominal Supply Current | 10mA |
| Propagation Delay | 150 ns |
| Logic Function | Receiver, Transceiver |
| Data Rate | 250kbps |
| Differential Output | NO |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Number of Transceivers | 1 |
| ESD Protection | Yes |
| Output Low Current-Max | 0.0032A |
| Height | 950μm |
| Length | 5.1mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX221EEUE+ Overview
Due to the enhanced 16-TSSOP (0.173, 4.40mm Width) package, this driver IC is excellent for driving common LEDs.The Tube package houses this receiver.It has proved to be a valuable component for a variety of applications since it is a Transceiver can transceiver.A Surface Mount-type PCB or development board can be used to place this wide receiver.This differential driver uses 4.5V~5.5V for power supply.The field can have up to 1/1 eligible receivers/drivers at once when using this electronic part.IC receiver has been designed primarily for applications operating at -40°C~85°C.With a supply voltage range of 5V, this line driver ic operates efficiently.In order to drive and receive signals from data, this wide receiver has 16 terminations integrated.Transceiver comes with 16 standard pinouts that meet the market's requirements.Since the base part number MAX221 uniquely identifies the product type, temperature, package, etc., you can use it to find more variations.The driver IC has improved power dissipation control.Optical transceiver package size is greatly reduced due to downsizing of the ICs and high-density Surface Mount mounting technologies.In terms of resolution, this ic receiver was capable of providing a 1-bit resolution.Typically, the resolution of this receiver is specified to be 1 bits.There is a 5V input voltage supply that can be used to operate this transceiver module.It is possible to subcategoriLine Driver or Receiverse this rf transceiver module as Line Driver or Receivers.Driver ICs such as this one are designed to operate from 5V power sources.In total, there are 1 transceivers implemented by this module isolated transceiver.This IC has 4 serial I/Os that are standard for this type of IC.
MAX221EEUE+ Features
Tube package
16 pin count
16 pins
5V power supply
MAX221EEUE+ Applications
There are a lot of Maxim Integrated MAX221EEUE+ Drivers/Receivers/Transceivers applications.
- Wireless teaching
- Carrier phase observations
- Aircraft positioning
- Structural bonding
- Automation systems
- Wireless HD Photography
- Wireless smart house
- Wireless transmission
- Gigabit Ethernet
- Indoor ad hoc meeting
