MAX222EPN+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 18-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Tin (Sn) |
| Additional Feature | EXTERNAL CHARGE PUMP |
| HTS Code | 8542.39.00.01 |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX222 |
| Pin Count | 18 |
| JESD-30 Code | R-PDIP-T18 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Supply Current-Max | 0.01mA |
| Data Rate | 250kbps |
| Output Characteristics | 3-STATE |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Driver Number of Bits | 2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Interface Standard | EIA-232-E; TIA-232-E; V.28; V.24 |
| Receive Delay-Max | 1000 ns |
| Transmit Delay-Max | 3500 ns |
| Output Low Current-Max | 0.0032A |
| Out Swing-Min | 10 V |
| Height Seated (Max) | 4.572mm |
| Length | 22.86mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX222EPN+ Overview
LED drivers with the enhanced 18-DIP (0.300, 7.62mm) package will be able to drive a variety of common LEDs with ease.In this package, the receiver is mounted in the Tube format.This Transceiver can transceiver is a versatile part that has enabled many solutions to serve a variety of purposes.Ideally, you should place this wide receiver on a Through Hole-type PCB or development board.This differential driver consumes 4.5V~5.5V for its power supplyAs many as 2/2 eligible receivers/drivers can be used simultaneously with this electronic part.IC receiver likes this one are designed for use in applications where operating temperatures are -40°C~85°C.With a voltage range of 5V, this driver IC can operate efficiently.For driving and receiving signals from data, this wide receiver has 18 terminations integrated.In this package, you will find 18 market-standard pinouts for this transceiver.As the base part number MAX222 identifies the product type, temperature, package, etc., you can try searching with it to get more variants of this part.It provided a 2-bit resolution capability with this ic receiver.There is typically a resolution of 2 bits specified with this receiver.A rf transceiver module named Line Driver or Receivers belongs to this subcategory.It is designed to be operated from a 5V power supply, so the module isolated transceiver will work effectively.A EXTERNAL CHARGE PUMP function is also included on this optical transceiver module, which improves the overall signal management accuracy and stability.Input current should not exceed 0.01mA at the VCC pin of the ic receiver.
MAX222EPN+ Features
Tube package
18 pin count
5V power supply
MAX222EPN+ Applications
There are a lot of Maxim Integrated MAX222EPN+ Drivers/Receivers/Transceivers applications.
- Single to Multimode Fiber Conversion
- Portable radio
- Car radio
- Optical sub-assembly (OSA)
- Bridges
- Shortwave receiver
- Notebook
- LAN, SAN, WAN (local, storage, work area networks)
- Remote controls
- Servers
