MAX223EWI+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX223 |
| Pin Count | 28 |
| JESD-30 Code | R-PDSO-G28 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Data Rate | 250kbps |
| Output Characteristics | 3-STATE |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 4/5 |
| Driver Number of Bits | 4 |
| Receiver Number of Bits | 5 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Interface Standard | EIA-232-E; TIA-232-E; V.28; V.24 |
| Receive Delay-Max | 10000 ns |
| Transmit Delay-Max | 10000 ns |
| Output Low Current-Max | 0.0016A |
| Out Swing-Min | 10 V |
| Height Seated (Max) | 2.65mm |
| Length | 17.9mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX223EWI+ Overview
With the enhanced 28-SOIC (0.295, 7.50mm Width) package, this driver IC is excellent for driving common LEDs.This receiver is mounted in the Tube package.Several solutions have used this Transceiver can transceiver in a variety of applications due to its Transceiver IC nature.PCB or development board with Surface Mount-type connectors can accommodate this wide receiver.It takes 4.5V~5.5V from the power supply to run this differential driver.At any one time, this electronic part can have up to 4/5 eligible receivers/drivers.IC receiver likes this one are designed for use in applications where operating temperatures are -40°C~85°C.An output voltage range of 5V is sufficient to run this line driver ic efficiently.The integrated terminations of this wide receiver allow it to drive and receive signals from data.There are 28 pinouts available on this transceiver which are market standard.For more variants of this part, try searching with the base part number MAX223, which indicates the product type, temperature, package, etc.It provided a 4-bit resolution capability with this ic receiver.There are typically 5 bits of resolution specified in the specifications of this receiver.A subcategory named Line Driver or Receivers can be used to group this rf transceiver module.There is one driver IC in this package which is intended to be operated by 5V of power.
MAX223EWI+ Features
Tube package
28 pin count
5V power supply
MAX223EWI+ Applications
There are a lot of Maxim Integrated MAX223EWI+ Drivers/Receivers/Transceivers applications.
- Desktop PC
- Optical sub-assembly (OSA)
- Data center
- Servers
- Datacom networking applications
- Car alarm systems
- Ethernet circuitry
- Aircraft navigation
- Satellite ground stations
- IP cameras
