MAX232ECPWR
| Parameters | |
|---|---|
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | MAX232 |
| Pin Count | 16 |
| Output Voltage | 7V |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Nominal Supply Current | 10mA |
| Output Current | 10mA |
| Propagation Delay | 500 ns |
| Logic Function | Receiver, Transceiver |
| Data Rate | 250kbps |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| Simplex/Duplex | Full Duplex |
| Supply Voltage1-Nom | 5V |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Line Driver or Receivers |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
MAX232ECPWR Overview
Designed for common LEDs, this driver IC features an enhanced 16-TSSOP (0.173, 4.40mm Width) package.The Tape & Reel (TR) package houses this receiver.It has proved to be a valuable component for a variety of applications since it is a Transceiver can transceiver.On any Surface Mount-type PCB or development board, you can install this wide receiver.Power supply for this differential driver is 4.5V~5.5V.At any one time, this electronic part can have up to 2/2 eligible receivers/drivers.IC receiver likes this one are designed for use in applications where operating temperatures are 0°C~70°C.With a voltage range of 5V, this driver IC can operate efficiently.Integrated into this wide receiver are 16 terminations that are used for driving and receiving signals from data.Transceiver comes with 16 standard pinouts that meet the market's requirements.You can search with MAX232 to get more variants of this part, since it identifies the product type, temperature, package, etc.An enhanced power dissipation control driver IC featuring 16 pins.This package size decreases dramatically due to optical transceiver downsizing and high-density Surface Mount mounting technologies.In the case of this receiver, a resolution of 2 bits is typically specified.There is a 5V input voltage supply that can be used to operate this transceiver module.In this category, this rf transceiver module belongs to the Line Driver or Receivers subcategory.Driver ICs are designed to work with a 5V power supply and this driver IC is one of them.Transceivers implemented by this IC total 1 in total.The integrator circuit comes with embedded 2 drivers.7V is the voltage Wide receiver can deliver.In this bluetooth transceiver, a 10mA output current is provided as an output.
MAX232ECPWR Features
Tape & Reel (TR) package
16 pin count
16 pins
5V power supply
MAX232ECPWR Applications
There are a lot of Texas Instruments MAX232ECPWR Drivers/Receivers/Transceivers applications.
- Wireless smart house
- Desktop radio
- Fiber optic cable connection network
- Aircraft navigation
- LAN, SAN, WAN (local, storage, work area networks)
- Wireless projection application for conferences
- Wireless network systems
- Wireless interactive experience
- Satellite ground stations
- Home theater wiring-free
