MAX232ECWE+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Additional Feature | EXTERNAL CHARGE PUMP |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX232 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-232 |
| Number of I/O | 8 |
| Nominal Supply Current | 10mA |
| Propagation Delay | 1 μs |
| Logic Function | Receiver, Transceiver |
| Data Rate | 120Kbps |
| Output Characteristics | TOTEM-POLE |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| Width | 7.5mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX232ECWE+T Overview
Due to the enhanced 16-SOIC (0.295, 7.50mm Width) package, this driver IC is excellent for driving common LEDs.The Tape & Reel (TR) package contains this receiver.Since this part is a Transceiver can transceiver, a number of solutions have been able to utiliTransceivere it for various purposes.On any Surface Mount-type PCB or development board, this wide receiver can be placed.Power supply for this differential driver is 4.5V~5.5V.As many as 2/2 receivers/drivers are eligible for use on this electronic part.IC receiver's like this are designed for applications requiring a 0°C~70°C operating temperature.An output voltage range of 5V is sufficient to run this line driver ic efficiently.In order to drive and receive signals from data, this wide receiver has 16 terminations integrated.It is packaged with 16 pinouts that are market standard for this particular transceiver.You can search with MAX232 to get more variants of this part, since it identifies the product type, temperature, package, etc.A 16-pin driver IC with enhanced power dissipation control is featured here.A dramatic reduction in package size is achieved through optical transceiver downsizing and high-density Surface Mount mounting technologies.In most cases, the receiver will be specified with a 2-bit resolution.There is a supply voltage of 5V on the input of this transceiver module, so it can be operated from that source.There is a subcategory called Line Driver or Receivers for this rf transceiver module.There is one driver IC that is designed to operate from a 5V power supply, and only one driver IC in total.It implements 1 transceivers in total.This electronic part can have?up to 2 eligible drivers on the field at once.?This optical transceiver module also features the EXTERNAL CHARGE PUMP function, improving the overall signal management stability and accuracy.This is an IC with 8 standard serial I/O capabilities.
MAX232ECWE+T Features
Tape & Reel (TR) package
16 pin count
16 pins
5V power supply
MAX232ECWE+T Applications
There are a lot of Maxim Integrated MAX232ECWE+T Drivers/Receivers/Transceivers applications.
- Structural bonding
- Satellite ground stations
- Wireless teaching
- Wireless 3D game
- Remote controls
- Pocket PC
- Ship
- transmission relay
- Single to Multimode Fiber Conversion
- Wireless showroom
