MAX234CPE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Type | Driver |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | EXTERNAL CHARGE PUMP |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX234 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 4 |
| Interface | RS-232 |
| Number of I/O | 8 |
| Nominal Supply Current | 4μA |
| Power Dissipation | 842mW |
| Propagation Delay | 10 μs |
| Data Rate | 120Kbps |
| Differential Output | NO |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 4/0 |
| Driver Number of Bits | 4 |
| Receive Delay-Max | 10000 ns |
| Transmit Delay-Max | 10000 ns |
| Out Swing-Min | 10 V |
| Height | 4.45mm |
| Length | 19.43mm |
| Width | 7.87mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX234CPE+ Overview
LED drivers with the enhanced 16-DIP (0.300, 7.62mm) package will be able to drive a variety of common LEDs with ease.Tube package is used for this receiver.As a Driver can transceiver, this part has enabled many applications to be served.PCB or development board with Through Hole-type connectors can accommodate this wide receiver.With respect to the power supply, this differential driver uses 4.5V~5.5V.This electronic part can have?up to 4/0 eligible receivers/drivers on the field at once.?IC receiver's like this are designed for applications requiring a 0°C~70°C operating temperature.5V is the supply voltage range that this line driver ic can efficiently operate with.In this wide receiver, 16 terminations are integrated for driving and receiving signals from data.In this package, you will find 16 market-standard pinouts for this transceiver.As the base part number MAX234 identifies the product type, temperature, package, etc., you can try searching with it to get more variants of this part.An enhanced power dissipation control driver IC featuring 16 pins.Through optical transceiver downsizing and high-density Through Hole mounting technologies, its package size is reduced dramatically.An important feature of this ic receiver was its 4-bit resolution capability.An input voltage supply of 5V is required to operate the transceiver module.The driver IC in this product is designed so that it can be powered by 5V.With the EXTERNAL CHARGE PUMP function, this optical transceiver module improves accuracy and stability of signal management overall.This is an IC with 8 standard serial I/O capabilities.A total of 4 channels are embedded in this optical transceiver, making it a highly versatile devoptical transceivere.
MAX234CPE+ Features
Tube package
16 pin count
16 pins
5V power supply
4 channels
MAX234CPE+ Applications
There are a lot of Maxim Integrated MAX234CPE+ Drivers/Receivers/Transceivers applications.
- VoIP phones
- Fiber optic cable connection network
- Changeing the frequency from IF to RF
- Telecom applications
- Wireless transmission
- Single fiber bidirectional application
- Satellite radio receiver
- Gigabit Ethernet
- Wireless multimedia center in smart home
- Wireless communication
