MAX237EWG+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | EXTERNAL CHARGE PUMP |
| HTS Code | 8542.39.00.01 |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX237 |
| Pin Count | 24 |
| JESD-30 Code | R-PDSO-G24 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Supply Current-Max | 15mA |
| Data Rate | 120Kbps |
| Output Characteristics | TOTEM-POLE |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 5/3 |
| Driver Number of Bits | 5 |
| Receiver Number of Bits | 3 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Interface Standard | EIA-232-E; TIA-232-E; V.28; V.24 |
| Receive Delay-Max | 10000 ns |
| Transmit Delay-Max | 10000 ns |
| Output Low Current-Max | 0.0016A |
| Out Swing-Min | 10 V |
| Height Seated (Max) | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX237EWG+ Overview
With the enhanced 24-SOIC (0.295, 7.50mm Width) package, this driver IC is excellent for driving common LEDs.In the Tube package, this receiver is mounted.With its Transceiver can transceiver design, this part can be incorporated into a wide range of solutions.Ideally, you should place this wide receiver on a Surface Mount-type PCB or development board.This differential driver uses 4.5V~5.5V for power supply.At any given time, there can be up to 5/3 eligible receivers/drivers for this electronic part.As its name implies, this ic receiver is designed for applications where -40°C~85°C is the operating temperature.With a supply voltage range of 5V, this line driver ic operates efficiently.In order to drive and receive signals from data, this wide receiver has 24 terminations integrated.The transceiver is packaged with 24 market standard pinouts so that it can be easily used.The base part number MAX237 identifies the product type, temperature, package, etc., so you can search for more variants by using it.Using this ic receiver, you were able to achieve a resolution of 5 bits.In most cases, the receiver will be specified with a 3-bit resolution.Line Driver or Receivers is a subcategory of this rf transceiver module.The driver IC in this product is designed so that it can be powered by 5V.ICs with EXTERNAL CHARGE PUMP functions also improve the overall stability and accuracy of signal management.It is important to supply enough input current to the VCC pin of the ic receiver, but not exceeding 15mA.
MAX237EWG+ Features
Tube package
24 pin count
5V power supply
MAX237EWG+ Applications
There are a lot of Maxim Integrated MAX237EWG+ Drivers/Receivers/Transceivers applications.
- Interconnection between switches and computers
- Fiber-to-the-desktop
- Routers
- Desktop PC
- Vehicle
- Copper connection network
- LAN, SAN, WAN (local, storage, work area networks)
- Wireless smart house
- Sensor reporting
- Fast Ethernet
