banner_page

MAX239CNG+

24 Terminations24 Pin MAX239 Receivers3/5 Drivers/Receivers3 Functions


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX239CNG+
  • Package: 24-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 205
  • Description: 24 Terminations24 Pin MAX239 Receivers3/5 Drivers/Receivers3 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Through Hole
Mounting Type Through Hole
Package / Case 24-DIP (0.300, 7.62mm)
Number of Pins 24
Operating Temperature 0°C~70°C
Packaging Tube
Published 2011
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 24
ECCN Code EAR99
Type Transceiver
Terminal Finish Matte Tin (Sn)
Additional Feature EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS
Subcategory Line Driver or Receivers
Technology CMOS
Voltage - Supply 5V 7.5V~13.2V
Terminal Position DUAL
Peak Reflow Temperature (Cel) 260
Number of Functions 3
Supply Voltage 5V
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number MAX239
Pin Count 24
Interface RS-232
Number of I/O 16
Nominal Supply Current 1mA
Propagation Delay 10 μs
Logic Function Receiver, Transceiver
Data Rate 120Kbps
Output Characteristics TOTEM-POLE
Differential Output NO
Output Polarity INVERTED
Protocol RS232
Input Characteristics SCHMITT TRIGGER
Number of Drivers/Receivers 3/5
Duplex Full
Receiver Hysteresis 500mV
Number of Drivers 3
Number of Transceivers 1
Number of Receivers 5
Width 7.62mm
Radiation Hardening No
REACH SVHC Unknown
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MAX239CNG+ Overview


Due to the enhanced 24-DIP (0.300, 7.62mm) package, this driver IC is excellent for driving common LEDs.The Tube package houses this receiver.As a Transceiver can transceiver, this part has enabled many applications to be served.The wide receiver can be mounted on any Through Hole-type PCB or development board.This differential driver uses 5V 7.5V~13.2V for power supply.At any one time, this electronic part can have up to 3/5 eligible receivers/drivers.IC receiver has been designed primarily for applications operating at 0°C~70°C.An output voltage range of 5V is sufficient to run this line driver ic efficiently.Integrated into this wide receiver are 24 terminations that are used for driving and receiving signals from data.A package consisting of 24 market standard pinouts is provided with this integrated circuit.As the base part number MAX239 identifies the product type, temperature, package, etc., you can try searching with it to get more variants of this part.An enhanced power dissipation control is provided by this 24-pin driver IC.A dramatic reduction in package size is achieved through optical transceiver downsizing and high-density Through Hole mounting technologies.A rf transceiver module named Line Driver or Receivers belongs to this subcategory.The module isolated transceiver implements a total of 1 transceivers.There are 5 receivers inside.The integrator circuit has embedded 3 drivers.A EXTERNAL CHARGE PUMP; TRISTATABLE RECEIVERS function is also included in this optical transceiver module, which improves stability and accuracy of signal management.In this instance, there are a total of 16 serial input/output ports on the IC.

MAX239CNG+ Features


Tube package
24 pin count
24 pins

MAX239CNG+ Applications


There are a lot of Maxim Integrated MAX239CNG+ Drivers/Receivers/Transceivers applications.

  • Wireless smart house
  • Wireless teaching
  • Satellite communication
  • Wired telephone
  • Fiber optic cable connection network
  • Radio transmission
  • Cable network front end
  • Routers
  • VoIP phones
  • Satellite ground stations

Write a review

Note: HTML is not translated!
    Bad           Good