MAX241ECAI+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | TRISTATABLE RECEIVERS; EXTERNAL CHARGE PUMP |
| HTS Code | 8542.39.00.01 |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX241 |
| Pin Count | 28 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Supply Current-Max | 15mA |
| Data Rate | 120Kbps |
| Output Characteristics | 3-STATE |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 4/5 |
| Driver Number of Bits | 4 |
| Receiver Number of Bits | 5 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Receive Delay-Max | 10000 ns |
| Output Low Current-Max | 0.0016A |
| Out Swing-Min | 10 V |
| Height Seated (Max) | 1.99mm |
| Length | 10.2mm |
| Width | 5.29mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX241ECAI+ Overview
This LED driver IC features an enhanced 28-SSOP (0.209, 5.30mm Width) package for driving common LEDs.In this package, the receiver is mounted in the Tube format.Being a Transceiver can transceiver, this part has empowered many solutions to serve for a variety of applications.This wide receiver can be placed on any Surface Mount-type PCB or development board.In terms of power supply, this differential driver utilizes 4.5V~5.5V.During operation, this electronic part may have up to 4/5 eligible receivers/drivers.This ic receiver has been primarily designed for applications where the operating temperature is 0°C~70°C.5V is the supply voltage range that this line driver ic can efficiently operate with.This integrated circuit has 28 terminations designed for driving and receiving signals from data.In this package, you will find 28 market-standard pinouts for this transceiver.Since the part number MAX241 represents the product type, temperature, package, etc., you can try searching with that number to find more variants.28-pin driver IC with improved power dissipation control.This ic receiver provided a 4-bit resolution capability. As a rule of thumb, this receiver is typically specified with a resolution of 5 bits.A Line Driver or Receivers subcategory can be assigned to this rf transceiver module.It is designed to be operated from a 5V power supply, so the module isolated transceiver will work effectively.The TRISTATABLE RECEIVERS; EXTERNAL CHARGE PUMP function of this optical transceiver module improves the overall stability and accuracy of signal management.Enough but no exceeding 15mA of input current should be supplied to the VCC pin of the ic receiver.
MAX241ECAI+ Features
Tube package
28 pin count
28 pins
5V power supply
MAX241ECAI+ Applications
There are a lot of Maxim Integrated MAX241ECAI+ Drivers/Receivers/Transceivers applications.
- Datacom networking applications
- Precision geodetic measurement
- Gigabit Ethernet
- interconnection between computers
- Structural bonding
- Wireless teaching
- Carrier phase observations
- Clock radio
- Wireless projection application for conferences
- transmission relay
