banner_page

MAX3160EEAP+

20 Terminations20 Pin MAX3160 Receivers1 Bits 2/2 Drivers/Receivers1 Functions


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-MAX3160EEAP+
  • Package: 20-SSOP (0.209, 5.30mm Width)
  • Datasheet: PDF
  • Stock: 574
  • Description: 20 Terminations20 Pin MAX3160 Receivers1 Bits 2/2 Drivers/Receivers1 Functions(Kg)

Details

Tags

Parameters
Receiver Hysteresis 500mV
Simplex/Duplex Full Duplex
Transmit Delay-Max 800 ns
Max Junction Temperature (Tj) 150°C
Number of Receivers 2
Out Swing-Min 10 V
Height 1.99mm
Length 7.33mm
Width 5.38mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-SSOP (0.209, 5.30mm Width)
Number of Pins 20
Weight 453.59237mg
Operating Temperature -40°C~85°C
Packaging Tube
Published 2007
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
Termination SMD/SMT
ECCN Code EAR99
Type Transceiver
Terminal Finish Matte Tin (Sn)
Subcategory Line Driver or Receivers
Technology CMOS
Voltage - Supply 3V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number MAX3160
Pin Count 20
Power Supplies 3.3/5V
Interface RS-232, RS-422, RS-485
Operating Supply Current 2.8mA
Nominal Supply Current 2.5mA
Propagation Delay 150 ns
Data Rate 10Mbps
Differential Output YES
Protocol RS232, RS422, RS485
Input Characteristics DIFFERENTIAL SCHMITT TRIGGER
Number of Drivers/Receivers 2/2
Driver Number of Bits 1
Duplex Full

MAX3160EEAP+ Overview


This LED driver IC features an enhanced 20-SSOP (0.209, 5.30mm Width) package for driving common LEDs.Tube package is used for this receiver.Since this part is a Transceiver can transceiver, a number of solutions have been able to utiliTransceivere it for various purposes.PCBs or development boards with Surface Mount-types can accommodate this wide receiver.Power supply requirements for this differential driver are 3V~5.5V.As many as 2/2 receivers/drivers are eligible for use on this electronic part.The operating temperature of this ic receiver is -40°C~85°C. It is primarily designed for applications with low temperatures.There is a voltage range of 3.3V for this line driver ic, so it can operate efficiently.This integrated circuit has 20 terminations designed for driving and receiving signals from data.The transceiver is packaged with 20 market standard pinouts so that it can be easily used.MAX3160 is the base part number for this part, and it identifies the product type, temperature, packaging, etc., so you can search for more variants with it.A 20-pin driver IC with enhanced power dissipation control is featured here.The package size of this optical transceiver has been dramatically reduced by downsizing ICs and using high-density Surface Mount mounting techniques.It was possible to achieve a 1-bit resolution through this ic receiver.There is a subcategory called Line Driver or Receivers for this rf transceiver module.There is one driver IC in this package which is intended to be operated by 3.3/5V of power.In addition to that, it contains 2 receivers as well.An input voltage of 2.8mA is recommended for this integrating circuit to be able to drive LEDs.

MAX3160EEAP+ Features


Tube package
20 pin count
20 pins
3.3/5V power supply

MAX3160EEAP+ Applications


There are a lot of Maxim Integrated MAX3160EEAP+ Drivers/Receivers/Transceivers applications.

  • Carrier phase observations
  • Wireless communication
  • Ship
  • transmission relay
  • Remote controls
  • Structural bonding
  • Single to Multimode Fiber Conversion
  • Wireless projection application for conferences
  • Metro access rings
  • Wireless showroom

Write a review

Note: HTML is not translated!
    Bad           Good