MAX3162EAI+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Weight | 2.26799g |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Line Driver or Receivers |
| Technology | BICMOS |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX3162 |
| Pin Count | 28 |
| Power Supplies | 3.3/5V |
| Interface | RS-232, RS-422, RS-485 |
| Operating Supply Current | 2.5mA |
| Propagation Delay | 150 ns |
| Supply Current-Max | 6mA |
| Data Rate | 10Mbps |
| Differential Output | YES |
| Protocol | RS232, RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| Simplex/Duplex | Full Duplex |
| Transmit Delay-Max | 800 ns |
| Height | 1.78mm |
| Length | 10.33mm |
| Width | 5.38mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX3162EAI+ Overview
The enhanced 28-SSOP (0.209, 5.30mm Width) package makes it an excellent LED driver.The receiver is packaged in a Tube package.As a Transceiver can transceiver, this part has enabled many applications to be served.Any Surface Mount-type PCB or development board can be used with this wide receiver.This differential driver uses 3V~5.5V for power supply.The field can have up to 2/2 eligible receivers/drivers at once when using this electronic part.IC receiver's like this are designed for applications requiring a -40°C~85°C operating temperature.Wide receiver can operate within the range of 3.3V supply voltages efficiently.Integrated into this wide receiver are 28 terminations that are used for driving and receiving signals from data.Transceiver comes with 28 standard pinouts that meet the market's requirements.MAX3162 is the base part number for this part, and it identifies the product type, temperature, packaging, etc., so you can search for more variants with it.A 28-pin driver IC with enhanced power dissipation control is featured here.Through optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size is reduced dramatically.Typically, the resolution of this receiver is specified to be 2 bits.There is a subcategory called Line Driver or Receivers for this rf transceiver module.The driver IC in this product is designed so that it can be powered by 3.3/5V.There are 1 transceivers implemented in this module isolated transceiver.Embedded 2 drivers are included on the integrator circuit.There should be enough current supplied to the VCC pin of the part, but not more than 6mA.It is capable of driving LEDs with a voltage of 2.5mA as the input voltage to this integrating circuit.
MAX3162EAI+ Features
Tube package
28 pin count
28 pins
3.3/5V power supply
MAX3162EAI+ Applications
There are a lot of Maxim Integrated MAX3162EAI+ Drivers/Receivers/Transceivers applications.
- Aircraft positioning
- Long-distance fiber optic network applications
- transmission relay
- interconnection between computers
- Gigabit Ethernet
- Cordless telephone
- Satellite communications networks
- Wireless teaching
- AV receiver
- Wireless HD Photography
