MAX3221EAE+T
| Parameters | |
|---|---|
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX3221 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 3.3/5V |
| Supply Current-Max | 1mA |
| Data Rate | 235Kbps |
| Output Characteristics | 3-STATE |
| Differential Output | NO |
| Output Polarity | INVERTED |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 300mV |
| Interface Standard | EIA-232; V.24; V.28 |
| Out Swing-Min | 5 V |
| Height Seated (Max) | 1.99mm |
| Length | 6.2mm |
| Width | 5.29mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
MAX3221EAE+T Overview
The enhanced 16-SSOP (0.209, 5.30mm Width) package makes it an excellent LED driver.In the Tape & Reel (TR) package, this receiver is mounted.The Transceiver can transceiver type enables this part to be used in a wide range of applications.Ideally, you should place this wide receiver on a Surface Mount-type PCB or development board.This differential driver requires a 3V~5.5V power supply.It is possible to have up to 1/1 receivers/drivers in use simultaneously with this electronic part.IC receiver's like this are designed for applications requiring a -40°C~85°C operating temperature.An operating voltage range of 3.3V is suitable for this line driver ic.Wide receiver has 16 terminations built in for driving or receiving signals from data.Transceiver comes with 16 standard pinouts that meet the market's requirements.With the part number MAX3221 identifying the product type, temperature, package, etc., you can search with it to see more variants.The driver IC has improved power dissipation control.As a result of the ic receiver, the resolution of the driver was increased to 1 bits.There is usually a 1-bit resolution specified for this receiver when it is used.It is possible to subcategoriLine Driver or Receiverse this rf transceiver module as Line Driver or Receivers.The driver IC in this product is designed so that it can be powered by 3.3/5V.A sufficient amount of input current should be provided to the optical transceiver module's VCC pin, but not more than 1mA.
MAX3221EAE+T Features
Tape & Reel (TR) package
16 pin count
16 pins
3.3/5V power supply
MAX3221EAE+T Applications
There are a lot of Maxim Integrated MAX3221EAE+T Drivers/Receivers/Transceivers applications.
- Desktop radio
- Wireless smart house
- Portable radio
- Indoor ad hoc meeting
- Shortwave receiver
- Switches
- Routers
- LAN, SAN, WAN (local, storage, work area networks)
- Pocket PC
- Low power, low voltage systems
